Yamamoto BT-2 Brass Cartridge fixation bolt upgrade set

1211

New product

32,90 €

Available for immediate shipping.

 
Description

BT-2 is the bolt made from brass and the set of a nut which are used when attaching a cartridge to head shell.

An analog cartridge has many kinds, and since the sizes of the attachment part also differ 10,000 exception 1000 differences, the thing of length also with various attachment bolts is needed. It seems that as for the screw made from aluminum generally used intensity is low and a sound quality top also has many demerits.

BT-2 is the bolt made from brass and the set of a nut which can be used in such a case. All the quality of the materials are nonmagnetic ground processing 24 Gold-plating finish in the product made from brass.

As for the bolt, in length, the 6, 8, 12, 15, 18, 20mm, and neighborhoods each seven kinds two of every of 25 and 4mm of opposite neighborhoods nut is a ten-piece set.

It is also possible to adjust the weight which includes head shell and a cartridge combining WA-1 of simultaneous sale using these longer screws. If the number of a nut and the length of a bolt are adjusted to fine tuning, it will become possible to unify the weight of a head shell part, and will become easy to use. If the weight of the sum total of a cartridge and head shell is unified, the necessity for needle pressure adjustment will be lost at the time of car ridge exchange, and it will become easy to carry out cartridge exchange. The opposite neighborhood is small with 4mm, and the nut attached to BT-2 can be used also for a part for the groove portion of a cartridge body reasonable.

Since I am describing the weight of each component below, please use reference of weight adjustment. The weight:6mm bolt which is each component : 0.36g/one piece 8mm bolt: 0.41g 12mm bolt:0.53g, 15mm bolt:0.63g, 18mm:0.73g, 20mm:0.81g, 25mm:0.98g, and 4mm nut:for neighborhood0.14g/1 piece, BT-2 Specifications - Form: Bolt nut for cartridge attachment.

Contents of a set:
M2.6 Length 6, 8, 12, 15, 18, 20, 25 mm [ two ] each
M2.6 Ten nuts for 4mm of neighborhoods
Finish :brass and nonmagnetic ground processing, and 24 Gold-plating finish.

 
Designer

Yamamoto Sound Craft at a glance



The Yamamoto Soundcraft Corporation is the HiFi branch of a Japanese machinery company. The large technical possibilities the mother company has, together with Mr. Yamamoto's deep knowledge about materials, and about electronics design has resulted in this wonderful and unique line of products. The special situation here is, that the Yamamoto Soundcraft company does not have to use mechanical parts from other companies. Whatever they need, they make it themself, just the way they want it. Resulting from this is the prestine quality level of the used components.

Until 2003, the company was mainly active in Japan only. With the coming of the internet, and growing interest in tube amplifiers, international sales just "happened" to the Yamamoto company. Until then, the company was mainly known in the Japanese-only tube scene. (which is a scene for itself !) But...the internet changed the way of working. There a lot of awards and articles on Yamamoto products.

Mr. Yamamoto always presented the Audio scene surprizingly beautifull and well-designed HiFi Equipment, made of finest base materials.
The accessories Mr. Yamamoto designs are genious products, and improve the performance of existing equipment. They are built built to exceptionally high standards: "Handcrafted" as a tag rarely ever signifies this level of bespoke luxury.

Yamamoto Sound Craft makes phono cartridges, head shells for those cartridges, a step up transformer; a phono equalizer amplifier plus a whole lot more. As you can tell Yamamoto-San is a true believer in the joys of vinyl. One of the most demanded Yamamoto accessories is the headshell made from the african ebony wood of the specific gravity 1.4, it is also used for clarinet, oboe, etc. In wood, a clear and forcible sound is the feature because of a very hard and tough material.

--- Shigeki Yamamoto ---
Here, Mr. Yamamoto demonstrates a test record player for the Japanese magazine "Analog". Please don't ask.... it is not for sale. This was only a study, showing the excellent sonic capabilities of the special treated hard wood as used for all products.
This specially treated cherry wood is called Shashi, and has properties like Ebony wood. So it is the secret tip for Audio products, and of course the #1 choice for the HiFi equipment made by Yamamoto Soundcraft.

Shigeki Yamamoto's professional background includes experience as a high-tech machinist—some of the best and most expensive amplifiers on the planet use his precision-made Teflon tube sockets—and his product gallery is itself a portrait of an audio craftsman with greater-than-average determination: When Yamamoto has an idea for a new kind of capacitor housing—or horn, or moving-coil phono cartridge, or equipment stand, or whatever—he simply gets to work and makes the thing himself. That sort of talent seems out of place in a corporation, or in a field of endeavor that misguided souls have allowed to be dominated by a corporate mentality.

Mr. Yamamoto's music preference is jazz recordings, and he is a very critical listener. His personal experience is, only the finest, natural materials can be used to reproduce the sound in the original way, as it was recorded. For this, no weak elements can be tolerated in the entire sound chain. Only in this way, a true reproduction of the original music will be made possible, with finest details occurring that can not be heard otherwise. This search for originality and perfect materials implicates not only the use of tubes.
It means every part of the product is subject to a careful selection process. Also the use of hard wood and other natural materials plays an important role in the complete design.

--- The Choice of materials ---
The Japanese Audiophile scene uses only original materials of highest quality and originality, going allways back to the root of the products. There is no interest in new inventions, but allways the search for originality comes first. Japanese tube enthusiasts like to improve products, but never loose the philosophy of the original design. This is how they are. You will find this quality attitude in all traditional Japanese companies like Yamamoto Soundcraft is one. They have a word for this, called Kai-Zen. It means so much as great dreams, small steps.

Write a review

Yamamoto BT-2 Brass Cartridge fixation bolt upgrade set

Write a review

 
Questions

30 other products in the same category:

Customers who bought this product also bought:

Menu