Black Friday: 13% off up to €1,999.99 with code BLACKFRIDAY2026 (until 29/11). 16% off from €2,000 with code BLACKFRIDAY16 (until 19/11).
Some products out of stock? Contact us
Soulines TT23 Turntable
Soulines TT23 Turntable with KiVi M3 Tonearm
(Description being updated)
- Drive: high-quality electronically controlled DC motor
- Speeds: 33.33 and 45.00 rpm with fine speed adjustment function
- Bearing: advanced inverted bearing, CNC-machined from solid stainless steel with brass insert and Delrin thrust pad; polished stainless steel shaft with captive hardened steel ball
- Platter: 40 mm thick, 3.5 kg, machined from cast acrylic
- Structure: multi-layer cast aluminium/acrylic/POM (Delrin) main plinth with 3-point coupled aluminium sub-plinth
- Finish: ice white with silver aluminium-coloured powder coating
The TT23 turntable is supplied with the following accessories:
-
SA Cover dust cover, made of acrylic (Plexiglas)
-
TT Clamp record clamp
-
cartridge alignment protractor precision-printed on 300 gsm card, including Baerwald, Löfgren and Stevenson alignments
Technical specifications:
- Drive: high-quality electronically controlled DC motor
- Speeds: 33.33 and 45.00 rpm with fine speed adjustment
- Bearing: advanced inverted bearing, CNC-machined from solid stainless steel with brass insert and Delrin thrust base; polished stainless steel shaft with integrated hardened steel ball
- Platter: 40 mm thick, weighs 3.5 kg, machined from cast acrylic
- Structure: multi-layer aluminium/acrylic/POM (Delrin) main plinth with 3-point coupled aluminium sub-plinth
- Finish: ice white and silver powder-coated aluminium
- Extras: SA Cover – acrylic dust cover; TT Clamp – record clamp; Protractor LP – cartridge alignment tool
- Power supply: 230 V / 50 Hz AC; 12 V / 300 mA DC input
- Dimensions: 440 × 355 × 180 mm (W × D × H) overall; 400 × 330 mm (W × D) footprint
- Net weight: 12 kg
- Packaging: 510 × 410 × 310 mm (W × D × H)
- Shipping weight: 14 kg
KiVi M3 Tonearm
The Soulines KiVi M3 tonearm is based on the principle of “mass distribution”, applied with respect and understanding, which led to the unique design of the bearing housing and armtube, made as a single element. Following this principle also called for a purpose-designed counterweight and an encapsulated uni-pivot bearing (or “false” uni-pivot). The combination of all these elements has produced a tonearm with flawless tracking ability, realistic dynamics and a neutral sound, allowing the cartridge to perform at its best.
The encapsulated uni-pivot bearing consists of three hardened stainless steel balls and a precision-machined stainless steel pivot. The pivot point is centred between the balls, which are held in place by a Delrin cup. This bearing may look like a “classic” uni-pivot, but it is actually a more sophisticated design that eliminates the unwanted movement (“skating”) typical of classic uni-pivot bearings. In use, this bearing behaves and “feels” more like a gimballed tonearm, the design preferred by most end users because it is easier to handle by hand.
The tapered armtube (wand) and the bearing housing are designed as a single component, machined from a solid block of Delrin to the highest precision and then bored with extreme accuracy. It is an expensive and complex production process requiring many machining operations, but it yields an almost ideal armtube and, in this case, bearing housing too. This seamless form is very rigid, far more so than a standard tube, and because the taper extends to the wall thickness of the armtube, with significantly thicker walls near the pivot, it effectively reduces standing waves, dispersing them in a way a parallel-walled tube cannot, and also moves sound-damaging resonances away from the cartridge, where they would have the most negative impact. As a non-resonant material, Delrin (POM) also contributes to a more natural sound, free from the resonances, vibrations and other unwanted side effects that can occur when the armtube is made of aluminium, stainless steel or similar materials.
Together with the upper part of the bearing housing, the Delrin armtube also forms the load-bearing bearing body. The lower part of the bearing housing, made of aluminium with added mass, carries the counterweight stub and the two stainless steel side stabilisers, and is firmly bolted to the Delrin armtube and the upper part of the bearing housing.
This assembly balances – and stabilises – the masses around the arm so that, when the cartridge tries to twist the arm at musical frequencies, the arm’s inertia alone keeps it stable. It also helps to effectively damp the resonances that will inevitably reach the end of the armtube at the bearing, diverting them out of the Delrin tube and the upper part of the housing into the weighted lower part of the housing, the steel stabilisers and the counterweight, without reflecting them back towards the cartridge.
In addition, this system places the centre of mass of the arm’s moving parts just below the pivot point and roughly on the same horizontal plane as the LP, allowing virtually perfect tracking of the record grooves, resulting in excellent dynamic response and a neutral sound.
Since it is already balanced by virtue of its specific design, the KiVi M3 arm allows an elegant solution for adjusting the counterweight and VTF (vertical tracking force).
To achieve the desired VTF across a wide range of cartridges, from light (5 g) to heavy (up to 15 g), the arm is supplied with 4 stainless steel counterweights, to be used in pairs. The counterweights have the same diameter but different thicknesses (and weights). The pair is positioned for the desired VTF by turning and tightening them against each other; as well as being easy to use, this allows precise adjustment to a tenth of a gram.
The central tonearm pillar is precision-machined from stainless steel, and the 5-pin DIN phono output socket is located at its base when the arm is bought separately.
When the arm comes fitted to a Soulines turntable, a high-quality phono cable is permanently soldered to the base of the pillar instead of the 5-pin socket.
Arm height, or VTA (Vertical Tracking Angle), is adjusted by moving the central pillar up or down within the aluminium base. The chosen height is locked by two M4 grub screws in the base’s vertical collar.
The headshell is machined from aluminium alloy, sandblasted and powder-coated to damp as far as possible the harmful resonances transmitted from the cartridge body. It is firmly bolted to the armtube’s aluminium insert, so that the semicircular upper part of the tube wall is clamped between the insert and the headshell. As well as acting as a clamp, the aluminium insert also serves as a grounding point, effectively picking up RF and EMI interference near the cartridge and draining it via the ground wire to the chassis of the phono preamplifier.
Cartridge azimuth is adjusted by rotating the azimuth-adjustable counterweight at the rear of the bearing housing; the correct position is locked with an M4 grub screw.
The anti-skating thread is attached exactly on the horizontal plane where the pivot tip contacts the bearing balls, which means it pulls only in that plane, without trying to twist the arm.
In addition, the tonearm wires, which are usually a problem because they resist the arm’s movement as they flex, are routed so that they enter the central pillar below the pivot point and as close to it as possible, minimising their effect.
KiVi M3 technical specifications:
- pivot-to-spindle distance: 222–224 mm (223 mm ideal)
- effective length: 240 mm
- effective mass: >15 g
- VTA adjustment: yes
- precision digital scale for measuring cartridge VTF included, measuring at LP level
Introducing Soulines (pronounced /ˈsuː.laɪnz/ – “Soo-lines”)
In mid-2009, a group of musicians and discerning music lovers with solid experience in recording, mixing, production and sound restoration on one side, and qualified mechanical engineers on the other, decided to turn their long-standing hobby and passion – modifying, upgrading, designing and building turntables – into a business.
They founded the company “tt recycled” (turntable recycled), www.ttrecycled.com, with the main aim of offering turntable upgrade and modification services, as well as recycling and redesigning them. Soulines soon established itself as a local turntable specialist, successfully recycling, redesigning and improving numerous models for local customers. Alongside commissioned projects, it built several turntables based on its own ideas. These models quickly became popular with local audiophiles, winning the “Best Sound Award” at the 2010 Belgrade Hi-Files Show.
The idea
Starting from the idea of designing its own turntable, Soulines wanted to create a high-quality product that was truly exceptional. The goal was to combine musicality and beauty in an electromechanical object capable of playing vinyl. At the same time, the focus was on a design that would be easy to use and set up.
The result is the Hermes DCX turntable.
After extensive listening tests and great success at the 2011 Belgrade Hi-Files Show, Soulines decided to offer the Hermes DCX internationally.
And so Soulines was born.
Design philosophy
The philosophy is that all the parts that make up a turntable are equally important; there is no point in focusing on a few extreme components, such as the mass of the platter or chassis, if the other components are not at the same level, and it is pointless to resort to extravagant components or complicated solutions.
The best results are normally achieved through simple engineering, careful selection of materials and manufacture of components that is not constrained by cost.Soulines turntables are essentially handmade, supported by advanced CAD technology, 3D-SW design software and CNC-controlled machinery.
The materials they are made from are carefully chosen for their acoustic and mechanical properties. Critical parts of the turntable such as the platter, bearing and spindle are made individually to match one another, not in series.
Rubber and cork feet of different shapes and thicknesses are used for damping. To reduce resonances to a minimum, the rigid parts of the system are coupled with layers of different materials.
All Soulines turntables feature belt drive with a DC motor, an inverted bearing and a non-metallic platter. Before final assembly, all components are inspected, hand-finished and assembled to a high level of accuracy to ensure excellent performance. Finished products are rigorously tested before being packed and shipped.
Soulines – Analogue Perfection, free from industrial compromise
Soulines represents the pure essence of vinyl, a fusion of impeccable design and extraordinary sound performance. Every Soulines turntable is designed to deliver a unique listening experience, in which every detail, every note and every nuance is rendered with a precision and depth that only the analogue format can offer.
With a philosophy that combines traditional craftsmanship with cutting-edge technology, Soulines creates turntables that are not just listening devices but genuine works of art. Made from the finest materials with meticulous attention to detail, every model is designed to convey the authenticity of the sound and the beauty of vinyl.
Soulines’ mission is simple: to bring music lovers an at-home listening experience that goes beyond mere music reproduction, turning it into a deep and richly emotional journey.
Leave a review