Black Friday: 13% off up to €1,999.99 with code BLACKFRIDAY2026 (until 29/11). 16% off from €2,000 with code BLACKFRIDAY16 (until 29/11).
Some products out of stock? Contact us
Skyanalog P-1M Low Output MC Phono Cartridge
Skyanalog. Possibly the most successful phono cartridge manufacturer you’ve never heard of.
Over the past 25 years, Skyanalog has produced phono cartridges for more than 20 highly respected international brands, with meticulous attention to detail, the most advanced technologies available, and results of the highest level.
For this reason, Skyanalog has decided to step forward under its own brand name, introducing a range of cartridges that combine superb technological sophistication and musical performance with a remarkably attractive price-to-performance ratio.
Skyanalog P-1M – Aluminum cantilever with conical diamond stylus – YAN suspension system – Weight: 10 g – Internal impedance: 5 Ohms – Recommended MC phono preamp load impedance: 200–470 Ohms – Recommended tonearm effective mass: medium.
Do you own a phono stage with an MC input and fancy trying a genuine low-output MC cartridge? The Skyanalog P-1M boasts superior specs: an aluminium cantilever, a conical diamond stylus and a 10 g metal body with threaded mounting holes. Once properly run in, it delivers astonishing performance for the price: a wide, dynamic sound of exceptional detail.
Skyanalog P-1M
The Skyanalog P-1M has a black aluminium body housing an MC motor with a square 4N OCC copper coil, an aluminium cantilever and a conical diamond stylus (r/R = 5/20 µm). The vertical tracking angle (VTA) is 20 degrees. The cartridge weighs 10 g and suits medium-mass tonearms.
Output voltage is 0.4 mV and internal impedance is 5 ohms; the manufacturer recommends a load of 200 to 470 ohms. Frequency response is 20 Hz to 20 kHz, channel separation exceeds 30 dB and channel balance is around 1 dB. Recommended tracking force is 1.1 to 1.5 g, dynamic compliance is 15 µm/mN and tracking ability is 70 µm at 315 Hz.
The cartridge's break-in period is about 30 hours at an average temperature of 23 degrees. The pickup box also includes screws and an Allen key for easy installation.
Their sound is open, airy, flowing, yet pleasingly analog. Its full-bodied low-end doesn’t settle into the music, but at the same time follows the silky, well-articulated tonality of the midrange with appropriate rhythmicity. The high end is not especially bright, with an exaggerated character, but it has a sufficiently airy resolution, so that the jazz-acoustic genre is not a problem, as well as lighter pop-rock music.

About Skyanalog
Jack Leung, the founder of Skyanalog, developed an interest in building tube amplifiers at a very young age. He later attended South China University of Technology, where he graduated with a degree in electronic engineering. In the same year, he founded Skyanalog, which initially produced tube amplifiers. The company later transitioned to the analog sector, first as an OEM cartridge supplier to many well-known international brands (more than 20 brands and over 50 models) in 25 years of activity, also providing support for all MC cartridges, whether made by Skyanalog or other manufacturers.
The principle that inspired Jack Leung to design and build the Skyanalog cartridge line can be summarized in the belief that:
“Every detail counts,” with a focus on cartridge production based on three pillars: Precision Handmade, Top Quality, Reliable After Sale.
There are two main series in the current lineup: the P series, including models P1 and P2, and the G series, including models G1, G2, G3, and Reference.
Both the P and G series models use high-quality cantilevers, with boron being used even in the more affordable models (P1, P2, G1) and ruby and sapphire for the higher-performing ones (G2, G3, and Reference).
Weight, internal impedance, output voltage and frequency response vary from model to model: the P-1M figures are those given at the top of this page.
Leave a review