×

iDSD Valkyrie DAC and Headphone Amplifier [2nd hand]

Reference:
Condition:
pre-owned

Unit formally used but in like new condition, still needs to be broken in. The device was purchased by mistake and subsequently taken back by us as a trade-in.
The original purchase receipt, dated June 12th 2025, is included inside the unit, so it comes with virtually full warranty coverage for the next 24 months.

Read moreShow less
€1,290.00 (tax incl.)
Out-of-Stock, please contact us

Notify me when available
Add to wishlist
Description

SPECIFICATIONS

  • Analogue Inputs Balanced 4.4mm, Single-Ended 3.5mm
  • Analogue Outputs Balanced 4.4mm, 2x Single-Ended 3.5mm, RCA
  • Battery Lithium-Polymer 20,000mAh
  • Bluetooth Formats aptX Lossless, aptX Adaptive, aptX, LDAC, LHDC/HWA, AAC, SBC
  • Charging PD/QC3.0 @ 20V; QC2.0 @ 5-12V
  • Digital Filters Bit Perfect, Standard, Minimum, GTO, Apodising, Transient Aligned, ‘K2’ mode, ‘K2HD’ mode
  • Digital Inputs USB-C, S/PDIF (Coaxial/Optical), Bluetooth 5.4
  • Dimensions 172 x 160 x 30mm
  • DNR (Line Output) 116dBA
  • Headphone Output Max Balanced 4.4mm: 13.5V / 5,700mW (@32Ω); 19.6V / 640mW (@600Ω) — S-Balanced 3.5mm: 8.9V / 2,475mW (@32Ω); 9.8V / 160mW (@600Ω)
  • Hi-Res Support PCM 768kHz, Native DSD512 with DSD1024 Remastering
  • Maximum Output Power (Headphone Section) 4.4mm: 13.5V / 5,700mW (@32Ω); 19.6V / 640mW (@600Ω) — 3.5mm: 8.9V / 2,475mW (@32Ω); 9.8V / 160mW (@600Ω)
  • Net Weight 882g
  • Output Impedance (Headphone Section) ≤0.3Ω via 4.4mm; ≤0.2Ω via 3.5mm — Line Output 205Ω via 4.4mm; 105Ω via 3.5mm
  • Power Consumption Nitro 13W, Turbo 6.5W, Normal 3.5W, xMEMS ≤6.1W
  • RMS Output Power (Headphone Section) 4.4mm: 12.0V / 2,250mW (@64Ω); 19.6V / 640mW (@600Ω) — 3.5mm: 8.5V / 2,258mW (@32Ω); 9.8V / 160mW (@600Ω)
  • SNR (Line Output) 116dBA
  • THD+N (Line Output) 0.002% (20–20kHz)
Read moreShow less
Product Details
Reviews
No comments

Leave a review

  • Quality:
Describe this product using simple and short words.
Upload images:
Drop images here or click to upload.
Disqus
You may also like
€119.00 (tax incl.)

WARNING: This module is not suitable for connection to a TV. It is designed to be installed in Sonnet DACs such as the Morpheus and Pasithea, replacing the USB module, in order to make the Sonnet DACs compatible with the HDMI-format I2S outputs of the listed compatible streamers.
Before installing the module into the device, it is necessary to configure the jumpers appropriately to ensure compatibility with your specific streamer.

Settings

Menu

Create a free account to use wishlists.

Sign in