Up to 15% off the entire catalogue
13% off from €1,500 | 15% from 2,000
Some products out of stock? Contact us
Metrum Acoustics & Sonnet Digital Audio I2S pinout specification
1 SDATA Serial I2S data
2 GND Ground
3 LRCLK Word clock
4 GND Ground
5 BCLK Bit clock
6 GND Ground
7 MCLK Master clock (used only for the MQA module)
8 GND Ground
Metrum Acoustics & Sonnet Digital Audio I2S voltage and impedance specification
Voltage level: 3.3 Volt (5 volt tolerant)
Impedance: the loading of the data lines can be switched between 100 Ohms and 100 kOhms.
With the jumpers installed, the loading resistance is 100 Ohm.
Without the jumpers, the loading resistance is 100 kOhm.
To effectively damp oscillations, a series resistance of 10 Ohms is present.
Transmission protocol: single ended (not differential like HDMI connectors).
Supported sample rates: 44.1 – 384 kHz.
Up to 15% off the entire catalogue
13% off from €1,500 | 15% from 2,000
Some products out of stock? Contact us
B-Stock product, (read below) in excellent condition with original packaging, 2 year warranty.
Second hand product in excellent condition, without original packaging and 1 year warranty.
WARNING: This module is not suitable for connection to a TV. It is designed to be installed in Sonnet DACs such as the Morpheus and Pasithea, replacing the USB module, in order to make the Sonnet DACs compatible with the HDMI-format I2S outputs of the listed compatible streamers.
Before installing the module into the device, it is necessary to configure the jumpers appropriately to ensure compatibility with your specific streamer.
B-Stock product, (read below) in excellent condition with original packaging, 2 year warranty.
Please sign in first.
Sign in
Create a free account to use wishlists.
Sign in
Leave a review