Rega Planar 6 Turntable with RB330 Tonearm

You can purchase this product in installments with Consel. Click here for more information.


1800

New product

Black color

More details

1 094,26 €

This article it's not in stock but can be ordered and it will take a number of days indicated into the Blue tab below, to be shipped to you. Please verify the availability for immediate shipping of other eventual versions of the same product.

Brand: Rega

 
Description

Do you also want to install a cartridge? Please read here.

Black finish. 

The Planar 6 has one goal, to reproduce your vinyl as accurately as possible.

We have engineered every aspect of this turntable to extract as much detail from the vinyl surface as possible. Advanced materials and engineering solutions have been used throughout the design to ensure the greatest level of performance.The Neo PSU offers electronic speed change, advanced anti-vibration control and user adjustable electronic fine speed adjustment only found on the RP10 until now. See 'product details' tab below for full information.

The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tancast 8 polyurethane foam core plinth (a material developed for the aerospace industry). This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim.

The Planar 6 now benefits from a single piece, machined aluminum sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard.

The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable.

Key Features:

  • NEO power supply.
  • Super lightweight foam core plinth.
  • Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin.
  • Available in one finish ‘Polaris Grey’ matt finish with high gloss black polymer edge trim.
  • Upgrade white drive belt fitted as standard.
  • Custom dual layer smoked / clear float glass platter.
  • Single piece aluminium sub platter.
  • Custom machined high precision drive pulley.
  • Patent pending, ultra-low friction central brass hub.
  • Rega’s double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy.
  • RB330 handmade precision tonearm with custom stainless weight.
  • New high spec Rega 24v low noise synchronous motor – each motor matched by hand to its own NEO PSU ensuring optimum anti-vibration control.
  • New smoked dust cover.
  • New aluminium foot trims and Planar style feet.
  • Available with Ania MC cartridge factory fitted / Discount available when factory fitted.

Technical Specification

Dimensions Turntable

Width 448mm
Depth 365mm
Height 120mm (Dustcover closed)
Weight 5.2kg

Dimensions Neo PSU

Width 180mm
Depth 155m
Height 50mm
Weight 0.6Kg

 
Designer

The first Rega - A star is born

Roy was now working for Ford as a technical editor but spent most of his free time installing friend's hi-fi equipment and building loudspeakers to sell. He became a part time retailer and found he had to spend a ridiculous amount of time repairing new turntables before his conscience and common sense would allow him to sell them to others! Out of frustration and a strong feeling he could do better, the Planet turntable was born. Roy and a partner registered "Rega" (Tony RElph, Roy GAndy). In 1973 and for a couple of years, Roy stayed at Ford and made turntables in the evening, helped by his partners: mum (who agreed to help out for two weeks and stayed for fifteen years!) and a succession of lads. The first turntables were sold through Cosmocord in the UK and a year later under the Rega name in West Germany, Denmark and France.

Roy was now able to leave Ford; he collected a redundancy check and promptly blew it on a factory in Rochford. Soon after the partnership with Tony Relph split, Roy swapping his share of Rega. Terry Davies joined as Rega's financial administrator.

In 1975 the Planar 2 was developed and quickly took its place in the market as the finest budget turntable. In June 1977 HI-FI News and Record Review announced the Planar 3 saying "The complete unit is worth a look"! Rega's usual blaze of non-publicity.

By 1980 Rega employed thirteen staff, exported to twelve countries, had twenty UK dealers and there were those dreaded 'waiting lists', mainly by eager customers shop-hopping!

 In 1980 Roy found an old mill (Park Street) in a residential area in Westcliff-on-Sea, Essex. The building had been deserted for twenty years and judging by the rot, seemed to have a millstream still running through it! Rega snapped it up for £30,000 and turned it into a compact but highly functional hi-fi factory, liberally painted bright green.

In 1983 after five years of dabbling and two years of intensive development, the RB300 and RB250 tonearms were produced. For ten years Rega had used Japanese and Danish manufactured arms on the turntables but after some searching Roy found a casting company prepared to work with him to develop an entirely new production method enabling the one-piece tube to be cast.

Rega won an international award for the RB300 casting, presented by Modern Metals 'awarded in open competition for excellence in the field of Aluminium Die Casting'. In their accompanying letter they wrote: 'we are still trying to figure out how you produce such a long cored hole so accurately'. This made up for never winning any prizes breeding budgies!

For five years, Rega sold a cartridge, the R100, made to specification in Japan. This was followed by the RB100, which was designed and developed by Rega. However, the cartridge had inevitable design limitations as it was being manufactured by an outside company.

In March 1988 the Bias and Elys cartridges went into production in house and sales exceeded 1000 in the first month, five times more than anticipated! The cartridges were a vital step on the way to a complete Rega system.

Completing the system...

In the summer of 1989 the Ela loudspeaker was introduced. Designed and developed at Rega, they were originally produced in Denmark but soon thereafter were manufactured in house.

In 1991, a period of dramatic expansion was heralded with the move into the world of electronics and the launch of two amplifiers, the Elex and the Elicit. The reason for producing these two amplifiers was simple; Rega was presented with a design it could not resist! Most importantly, the amplifiers fit into the company policy - which is to manufacture high quality, specialist hi-fi components that are reliable, consistent and sensibly priced. This development completed the Rega system.

A new factory was built in 1992 on the Temple Farm Industrial Estate in Southend-on-Sea under Roy's design and guidance to house the production of loudspeakers and amplifiers and to ensure room for further developments.

2014....

Over the past 40 years we have come a very long way. Now selling to more than 40 export markets and producing on average 2000 turntables alone every month, Rega now employ's almost 90 people in our purpose built 30,000 sq ft design and manufacturing facility in Essex, England.

Rega continues to grow and develop new products, all of which strictly follow those early Rega virtues of excellent build quality, long life and amazing value for money all backed up by a lifetime warranty against manufacture defects.

Write a review

Rega Planar 6 Turntable with RB330 Tonearm

Black color

Write a review

 
Questions

14 other products in the same category:

Availability

Products availability:

  • Rega Planar 6 Turntable with RB330 Tonearm

    This product can be ordered and will be shipped within 3 days. Also see the Availability tab and eventual options of the same product.


  • Available for immediate shipping.

    Product is available.
  • This product can be ordered and will be shipped within a certain number of days.

    Product is available to be ordered and will be shipped within the specified days.
  • This product is out of stock. The product is not available to be ordered. It could be incoming and to be email informed when it will be available for ordering, please click on "Email me when available" or contact us.

If a product is available an insufficient quantity, the system will not let you finalize the order, so in this case please contact us to know the future date when more quantities will be available.
Product availability is real-time updated and correspond to our actual stock quantities (Green) or to estimated obtainability times (Blue); in the case of (Blue) products, although the specified times are a realistic and conservative estimate, have to be intended as indicative and not as a binding obligation.

If you place an order containing both readily available products (Green) together with products that will make available within the indicated number of days (Blue), will be shipped alltogether when all product types are into our wharehouse; if you’d like we immediately ship the in-stock articles, it’s better that you place a separate order, or contact us.

When your order is shipped, we send you an email containing all details to track it.

For any further information please contact the Customer Service, available from monday to friday (hours: 9-13 / 15-17).

Menu