Q Acoustics 3020i Bookshelf Speaker Pair

New product

217,21 €

Available for immediate shipping.



The 3020i builds on the success of its multi award winning predecessor. Boasting 125mm (5 in) and 22mm (0.9 in) precision drivers, the Q 3020i speakers deliver deep bass and room-filling sound. The 3020i maintain the same acoustically optimal front profile but have been made slightly taller and deeper giving an overall cabinet size increase of 25%. This increased internal volume has enabled the Q 3020i to gain an extended low frequency response from the ported design so that more-than-ever the smaller enclosures in the range belie their diminutive stature with an impressively large-scale sound. 

The Q 3020i speakers can be shelf-mounted on compliant, pre-fitted rubber feet, stand-mounted or wall-mounted on optional, dedicated stands and brackets ensuring the Q 3020i fit seamlessly and fill your chosen listening room with bold, beautiful sound.


The Q 3020i boasts P2P™ (Point to Point) bracing which supports the parts of the enclosure that need to be stiffened making the new enclosures exceptionally rigid, improving the focus of the stereo image and giving the soundstage more accuracy than ever before. With the addition of a brand new mid/bass driver and a high frequency driver unit with the tweeters decoupled from the baffles, which allows the tweeter to perform with dramatically reduced interference, the Q 3020i is a true testament of the technological enhancements the entire series has seen to make it our most special yet.


Conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs. The speaker can be positioned very close to a rear wall even when banana plugs rather than spades or bare wires are used.


Not only does the entire 3000i range features all new enclosure aesthetics but it also offers 4 new contemporary finishes. The new 3000i series speakers are available in four standard finishes; Graphite Grey, English Walnut, Carbon Black or Arctic White. All are finished with an attractive chrome bezel around each driver and feature magnetic speaker grilles.


  • Enclosure type: 2-way reflex
  • Bass Unit: 125 mm (5 in)
  • Treble Unit: 22 mm (0.9 in)
  • Frequency Response (+3 dB, -6 dB): 64 Hz – 30 kHz
  • Nominal Impedance: 6 Ω
  • Minimum Impedance: 4 Ω
  • Sensitivity (2.83 Vrms@1 m): 88 dB
  • Stereo Amplifier Power: 25 - 75w
  • AV Receiver (2 ch. driven): 50 - 75w
  • Crossover Frequency: 2.4kHz
  • Effective Volume: 6.1 L (372 cu in)
  • Dimensions W/H/D: 170 x 278 x 282 mm (6.7 x 10.9 x 11.1 in)
  • Weight (per speaker): 5.5 kg (12.1 lbs)

What's in the box?

  • 2 x 3020i bookshelf speakers
  • 2 x Foam Bungs
  • 2 x Speaker Grilles
  • 1 x User Manual
  • 1 x Handling Gloves.
  • 8 x Rubber Speaker Grips

Introduction to the 3000i Series

The 3000i Series is an evolution of the 3000 Series, which has undergone a number of innovative improvements intended to bring about significant enhancements in both sonic performance and aesthetics from the already established and highly awarded range. The 3000i Series forms the core Hi-Fi loudspeaker offering from Q Acoustics. 

Coming from a fusion of both evolutionary and revolutionary thinking, the 3000i Series benefits from state-of-the-art speaker technology, as well as improvements to the cabinet construction. Every 3000i Series model is an outstanding, genuine Hi-Fi loudspeaker with models that can also be combined to deliver a fantastic home cinema sound. 

Beautiful to behold and available in four attractive finishes. The perfect soundstage for movies and music, at an impressive price point that will deliver a pure and uncoloured sound that will please even the most discerning audiophile.


The purpose of an exceptional Hi-Fi system is quite simply to provide a musical experience in the home, which comes as close as possible to the real thing. The 3000i Series boasts a range of features that enable exactly that. Every detail from the cabinet enclosure to the drivers, to the pioneering ‘Concept’ technology has been commissioned to this range. The emphasis on advanced cabinet design principles that preserve the subtle sonic clues which enable the ear to perceive a solid 3D soundstage is evident. Careful component matching and exhaustive listening tests have meant that the partnering electronics will do nothing to detract from the sheer enjoyment garnered by the sense of intimacy in the performance.


At the heart of the 3000i Series is a wealth of technology to ensure these are a true step up from an already highly awarded series. P2P™ bracing has been introduced to help keep the enclosure extra quiet, HPE™ to eliminate sympathetic resonance, equalising air pressure within the cabinet and a 22mm High Frequency Driver with a micro-fibre soft dome with wide surround which helps to create a wide, even dispersion of stereo. Just a few of the many technologies employed to elevate the 3000i Series.


Q Acoustics P2P™ (Point to Point) bracing across the 3000i series supports the parts of the enclosure that need to be stiffened making the new enclosures exceptionally rigid, improving the focus of the stereo image and giving the soundstage more accuracy than ever before.

* entire series


HPE™ (Helmholtz Pressure Equalizer) technology designed to convert pressure to velocity and reduce the overall pressure gradient within the speaker enclosure, has been applied to the Q 3050i floorstanding speakers to reduce cabinet resonance. This technology is perfect for taller loudspeakers that tend to resonate at a single favoured frequency.

** Q 3050i only


3000i Series tweeters are decoupled from the baffle via a compliant suspension system. Vibrations from the woofer, which can impair the performance of the tweeter are isolated allowing the tweeter to perform with dramatically reduced interference.


Whichever 3000i model you choose the cone is precision formed from impregnated and coated paper and teamed with a newly developed, low-hysteresis, rubber surround. The coated paper cone provides the optimum balance between stiffness and self- damping which means it can accelerate without flexing and stop very accurately without unwanted resonances.


The 3000i Series speakers are available in four finishes; Graphite Grey, English Walnut, Carbon Black or Arctic White. All are finished with an attractive chrome-finish bezel around each driver and feature magnetic speaker grilles, ensuring there is a finish perfect for your chosen listening room.

Q Acoustics as a glance

Q Acoustics is a multi-award winning hi-fi brand, which was founded by experts in the audio industry with the sole aim of developing a highly successful loudspeaker brand. It has been 10 years since Q Acoustics was founded, and in every year since we have continued to drive innovation and develop multi-award winning products.


Q Acoustics logo Introduction to Q Acoustics - the best affordable speakers in the world
The design brief for Q Acoustics products is very straightforward. We simply aim to design and produce the very best affordable loudspeakers in the world. Not of course the world's best loudspeakers at any price; but certainly the world's best loudspeakers 'for the money'.

To achieve this monumental task we assembled a team from the world's most experienced and successful loudspeaker designers and we are 100% confident they have been completely successful.

The results speak for themselves. Q Acoustics speakers receive prestigious awards and universal acclaim from consumers and expert reviewers alike. Everyone agrees that Q Acoustics products deliver a sonic performance unequalled at their price.

Q Acoustics has recently enjoyed great success at the What Hi-Fi Awards 2013. Q Acoustics had a very successful night and won an impressive five awards; in the stereo speaker category the Concept 20 won product of the year and best stereo speaker £200-£400, the 2020i won the best stereo speakers up to £200 and the 2050i won best floorstander £400-£800. Within the speaker packages category the 2000i 5.1 pack won the best traditional speaker package up to £700, and the new Q7000i won the best style speaker package £700-£1,000.

Write a review

Q Acoustics 3020i Bookshelf Speaker Pair

Write a review


Ottimi diffusori

Non sono un audiofilo, quindi non ho gli elementi necessari per una recensione informata. Ma le mie orecchie mi dicono che sono ottimi diffusori, abbinati ad un amplificatore arcam solo mi pare che il connubio sia perfetto, ascolto quasi esclusivamente musica liquida e sono molto soddisfatto. Le consiglio assolutamente, il prezzo è molto invitante e la cura dei dettagli piacevole. Unico difetto i piedini che nel mio caso ho trovato di spessori diversi, li ho tolti e sostituiti con degli altri che avevo acquistato su playstereo

  • Was this comment useful to you?
  • (0) (0)

Write your review!

  1. Renato Pier Paolo Siccardo
    2021-05-16 17:36
    Buonasera , viste le innumerevoli recensioni positive ed il prezzo particolarmente interessante che avete esposto , vorrei sapere se questi diffusori vanno bene in abbinamento ad un Rega IO , in primo luogo dal punto di vista sonico , e in secondo luogo se sono un facile carico per l\'amplificatore , chiedo questo perchè il produttore del Rega evidenzia che con carichi di 4 Ohm l\'amplificatore potrebbe superare i 40C° .Rimango in attesa di un vostro cortese riscontro e salutoSiccardo Renato
  2. filippo aceto
    2021-02-24 14:08
    Come andrebbero con un Onkyo a-9010?
    • PlayStereo
      2021-02-25 16:11
      Buonasera, confermiamo che le Q Acoustics rendono molto bene anche con amplificazioni di tipo consumer purché dotate di almeno circa 30W o più.
      • filippo aceto
        2021-02-25 16:57
        Grazie. Io ho delle indiana line tesi 261 e vorrei sostituirle con queste. Sia per spazio che estetica. Il mio unico dubbio è il reflex posteriore, da muro ho uno spazio di circa 15 cm.
        • PlayStereo
          2021-02-26 14:05
          Buongiorno Filippo, uno spazio di 15 cm è assolutamente più che sufficiente e non comporterebbe nessun problema dal punto di vista di una corretta riproduzione... Può tranquillamente posizionarle in questo modo.
  3. Carlo Coliandro
    2020-04-07 18:51
    Buonasera, vorrei usare le q acuostics 3020 con un arcam solo Music. È un abbinamento corretto?Grazie
    • PlayStereo
      2020-04-08 06:01
      Buongiorno, confermiamo che è un abbinamento corretto sia per il pilotaggio dei diffusori ( con gli 80W per canale dell’arcam) , sia a livello di sinergia timbrica.
      • Carlo Coliandro
        2020-04-08 06:37
        Grazie le ho ordinate ieri sera sul vostro sito,SalutiCarlo BonatoIl mer 8 apr 2020, 08:01 Disqus <notifications@disqus.net> ha scritto:

30 other products in the same category:

Customers who bought this product also bought: