Atlas Equator Integra RCA Interconnect Cables Pair 1m [2nd hand]

Atlas Equator Integra RCA-RCA Interconnect Cable

Atlas Cables Equator 111 6N, RCA interconnect cable with crimped connectors and 6N (99.9999% pure) copper conductors.

The Atlas Equator Mk II was awarded Best Hi-Fi Stereo Interconnect Cable in 2007 and 2008. Its predecessor received the same award in 2002 and 2003.

As part of our ongoing research and development programme, the Equator has been equipped with our latest non-magnetic RCA connector, known as the "Integra".

The connector features a solder-free interface between the 99.9999% pure copper twisted coaxial conductors and the connectors, for both the signal and return paths. By eliminating solder joints, an additional barrier to unrestricted signal transmission is removed.

The Integra connector consists of two opposing clamps that securely hold the cable without compressing it.

Thanks to its opposing clamp design, the Integra connector provides effective rejection of radio-frequency interference (RFI), from the RCA plug connection point through to the conductor interface, helping to minimise signal degradation and interference.

The Integra plug features a non-magnetic ABS housing, designed to minimise magnetic saturation effects on the return signal path. The plastic insulating sleeves provide an additional barrier against external interference, helping to preserve the integrity of the return signal.

Every Atlas cable is researched, developed and manufactured in Scotland, using only the finest materials available.

ATLAS Equator Integra RCA – Specifications

Construction: Coaxial (double shielded) 

Conductor material: OCC copper 

Dielectric: PEF (foamed polyethylene) 

Shielding: OFC, 95% coverage (double OFC braid) 

Capacitance: 53.27 pF/m Inductance: 0.40 µH/m 

Resistance: 0.027 Ohm/m Impedance: 78.25 Ohms at 1 MHz 

Outer diameter: 8.5 mm

Length: 1 mt