Tellurium Q SIlver Diamond RCA Interconnects - 1m pair

You can purchase this product in installments with Consel. Click here for more information.


1877

New product

PLEASE NOTE WE ARE UNABLE TO SHIP TELLURIUM Q PRODUCTS OVERSEAS. ITALY SALES ONLY.

More details

1 713,11 €

This article it's not in stock but can be ordered and it will take a number of days indicated into the Blue tab below, to be shipped to you. Please verify the availability for immediate shipping of other eventual versions of the same product.

 
Description

The Silver Diamond are the cables that we were not sure could be made (although we hoped they would be possible). If you read through the “Our Focus” section on the website, we talk about the fact that any cable from any manufacturer is an electronic filter, whether you want it to be or not – that is just a fact of life. Being a filter, any cable causes relative phase relationship issues for the signal. We have taken our research and development that was outlined in “Our Focus” and just tried to push the concept of a neutral filter as far as we thought it was possible to give you a highly transparent, natural and “real” presentation.

So what’s different? Well, compared to the Black Diamond, which was our award winning multi-product of the year cable, the Silver Diamond has even better bass definition, improved detail and a more extended top end (without any harshness) and something else which people are finding hard to define, simply because they have not heard it before. As one of the first people to hear the cable said, there is a “certain rightness” to the sound and that is because we have got closer to achieving our goal in cable development and have signal transmission than ever before, and you can hear it. Perhaps an analogy would be to talk about the Black Diamond as HD image quality, whereas the Silver Diamond gives you 4K Ultra HD quality with 3D effortlessly thrown in for good measure.

This cable behaves differently to our others, needing a run through of track three from our System disc to properly embed it, before listening on a new system even when it is run in – almost like conditioning the system to make the most of the cable’s abilities. It may sound a bit strange that a system needs to be tuned up or put in tune to get the most from this cable, but the cable is something quite unique as you will hear if you get the chance to listen to a system using it.

We are very proud to have this cable finally crowning our ranges.

 
Designer


  Audio products designed to combat phase distortion

Tellurium Q presentazione


prod_telluriumq_hifiworls_award_globe.jp UK Designed Audio Cable - UK Manufactured Audio Cable

10 products of the year and most wanted component in just 2 years by preserving relative phase relationships in a signal.

The first cables designed primarily to combat phase distortion.

Our work is for the audiophile and music lover who wants to hear the clearest, purest sound from their system at a reasonable price.

We are focused on performance and our aim is to set a new standard.

“something that I’ve never heard from any cable at this price point.”
Paul Rigby HiFi World August 2010

“Cavernous acoustic space.....palpable sense of reality...good sense of timing and pitch...the sound was controlled and didn’t harden as the volume increased...even tonal balance.”
Hi Fi News (Feb 2010 edition)

What you don’t get from us:
Pretty expensive packaging and superfluous ornamentation on the products that add nothing to the objective of the best sound with the least phase distortion possible.

What you get from us:
The best performance for price that we can give you.
A minimal amount of packaging (recyclable) because products shouldn’t cost the earth.

Tellurium Q at a glance

Tellurium Q is primarily an audio research and development (R&D) company that also manufactures products. R & D is at the centre of every decision we take and every product we make.

That is why we design and develop products starting with a completely blank canvas and ask “what is really happening with this process, in these materials” and build on solid fundamentals. That is why you may find that what we produce might look a little different from what you might expect but that is just because we are focused on how to get a better clearer sound. How something looks is of secondary importance because we are working for the serious audiophile and music lover who, like us,wants to hear more in their music. That may be the reason that although our little company has only just appeared on the HiFi scene has immediately been awarded 5 Globes for an entire speaker cable range, awarded cables of the year for the ENTIRE cable range by HiFi Plus magazine and again product of the year by HIFi World in their Jan 2011 edition. All in the first 12 months!

Tellurium Q® : The Range

Although cables should not affect the sound there are factors that have to be considered because audio systems are not perfect and customers have listening preferences too. So you will see we have engineered three distinct families of sound to take account of three distinct demands our customers have asked for. Which is why we have the Silver and Blue ranges as well as the Black which help achieve this for our customers:
Silver range: The sound can best be described as silver but without the fatigue and harshness that can go along with that material.
Black range: the natural / transparent range that allows an incredibly life like reproduction for use in a well balance system to simply unlock what the system can do.
Blue range: slight warmth that just takes the harsh top edge out of a system that is a little brittle or bright.
So now you know why our cables have won so many awards and we have grown so quickly. We have taken a different and radical approach by looking at the “problem” of cables because they are “secret electronic filters” and you ignore that at your listening peril.
By thinking of cables in this way we can get closer to our goal of combating phase distortion (or more accurately, preserving relative phase relationships in a signal) giving you the most transparent, natural sound possible.You can think of it like a blurred picture becoming clear.

Tellurium Q® : Our Focus

Tellurium Q® have been asked many times why our cables perform differently to others. We are not going to pass on the exact details of what we are doing to achieve the performance that the reviews and multiple product of the year awards talk about, however time moves on and so it is time to talk a little more about the how.
When Tellurium Q® was set up the focus was primarily on phase distortion and minimising this problem inherent in all cabling, whoever makes them and where ever and however they are made. The reason it is a problem is simple, all materials (not just cables) in the path of a signal will act as an electronic filter according to the definition in the box below, whether you want it to or not. This is undeniable.
Please understand we use the word filter as its scientific definition and not necessarily as something being “filtered out” like with a mechanical sieve. We are primarily focussed on removing the smearing of frequencies through a timing shift and by doing this you get better clarity and transparency from Tellurium Q® cables.
This is the definition of an electronic filter:
“A filter is an electrical network that alters the amplitude and/or phase characteristics of a signal with respect to frequency. Ideally, a filter will not add new frequencies to the input signal, nor will it change the component frequencies of that signal, but it will change the relative amplitudes of the various frequency components and/or their phase relationships.”
Source: National Semiconductor Corporation
N.B. This is true of all speakers, amplifiers, DACs, CD players, cables etc…in fact anything in the signal path.
Once you accept the fact that your audio system is acting as multiple electronic filters smudging your music, then you have a choice:
a. Forget the cable is an electronic filter (completely in the face of science) and compromise by having a smeared sound or
b. Do something about it and engineer as clear and phase neutral a path for the signal as possible to get the most transparent sound that current technology will allow and preserve the original signal phase relations as much as possible.
Unfortunately it is not as easy as just looking at a chart of materials and simply picking the one with the best conductivity. If that were the case then you would put some silver wire in place and the job would be done.

Where Tellurium Q® Came From

People have been asking how Tellurium Q® came about and what we are doing to make our products work so differently from what is currently available. This has caused us problems because there are trade secrets and production methodologies that we definitely do not want to share with our competitors. I think that sometimes we are too much on the side of caution and that causes reviewers and our distributors a little problem. What do they say? What is the story to give our customers, a hook, a reason to listen when there are so many companies claiming big things? Why should people believe that we have a genuinely different approach? Yes a client can hear this is true within seconds of listening but the big problem is giving people a reason to want to listen having not yet heard the cable. In the UK this is not such a big problem as more and more people are giving their feedback to their friends and Tellurium Q® is spreading rapidly by word of mouth as much as from the remarkable reviews.
However we can say a little about our background, how Tellurium Q® came about and what we had to do to develop the products. So here goes.

How Tellurium Q® was born

One afternoon at a recording studio in Somerset, Geoff Merrigan, who was there because he was the studio’s business advisor started a conversation with the studio owner and a technical electronics expert. As there was a strong interest in science and technology they started talking about the system set up and sound quality relating to, and influenced by the various electronics. There was a bold claim that the cables were causing problems in recording quality. Both the studio owner and Geoff took the stand point that a cable is just a cable and all it needs to do is transmit a signal and enough power, end of story, surely? An hour later after discussing the fundamentals of signal transfer theoretically in a standard cable’s construction and why exactly that caused problems. It made absolute sense and Tellurium Q® was born on a leap of faith. The new company invested heavily in R&D and non-standard tooling to bring about the first cable, Tellurium Q Black. Thankfully it exceeded expectations and in the UK there was an immediate uptake with a small handful of dealers who were prepared to use their ears. The most recent phase of development sees the introduction of our own tellurium copper connectors that have a near perfect synergy with the Tellurium Q® cables, as the latest review in the magazine HiFi World confirms. See here for review.
What people do not realise is that to get the best performance in a cable you actually have to be prepared to compromise between a number of factors. For example in most applications a signal must not leak into the dielectric (but this is a good thing in capacitors).
Stepping back further, you even need to ask what exactly is a “signal”. An electric current is not a bunch of electrons entering a wire at one end, zipping through and popping out the other end. No. It is more like the Newton’s cradle toy where a wave of impacts go through the swinging balls quickly while the balls themselves move very little. Even this analogy is a world away from what actually happens, though. Of course the electrons work their way through the wire. Just not very quickly that is all.
When you understand what a signal actually may be and can model the way it is likely to behave and how this “wave potential” is affected and then what function that signal has to fulfil, it is then time to do a bit of a balancing act. This is between, for example, capacitance, inductance, accurate transmission (not just material “purity” as many think) and high speed transmission (which in itself involves a whole host of lesser criteria). It is this fine tuning process that can lead to some surprises in choice of materials that is REQUIRED for the compromises to work efficiently and effectively. What we do a little differently is that we skew the balancing act to take into account phase accuracy to give a recording correct timing reproduction. In a nutshell, that is how we at Tellurium Q®get the results we get. We believe that we put more into research and development than any other company as a percentage of our profitability and we have no reason to stop doing so. Research is our passion and our customers are the beneficiaries of this.

Write a review

Tellurium Q SIlver Diamond RCA Interconnects - 1m pair

PLEASE NOTE WE ARE UNABLE TO SHIP TELLURIUM Q PRODUCTS OVERSEAS. ITALY SALES ONLY.

Write a review

 
Questions

30 other products in the same category:

Availability

Products availability:

  • Tellurium Q SIlver Diamond RCA Interconnects - 1m pair

    This product can be ordered and will be shipped within 10 days. Also see the Availability tab and eventual options of the same product.


  • Available for immediate shipping.

    Product is available.
  • This product can be ordered and will be shipped within a certain number of days.

    Product is available to be ordered and will be shipped within the specified days.
  • This product is out of stock. The product is not available to be ordered. It could be incoming and to be email informed when it will be available for ordering, please click on "Email me when available" or contact us.

If a product is available an insufficient quantity, the system will not let you finalize the order, so in this case please contact us to know the future date when more quantities will be available.
Product availability is real-time updated and correspond to our actual stock quantities (Green) or to estimated obtainability times (Blue); in the case of (Blue) products, although the specified times are a realistic and conservative estimate, have to be intended as indicative and not as a binding obligation.

If you place an order containing both readily available products (Green) together with products that will make available within the indicated number of days (Blue), will be shipped alltogether when all product types are into our wharehouse; if you’d like we immediately ship the in-stock articles, it’s better that you place a separate order, or contact us.

When your order is shipped, we send you an email containing all details to track it.

For any further information please contact the Customer Service, available from monday to friday (hours: 9-13 / 15-17).

Menu