×

Topping PA3s 2xMA12070 2x65W 4 Ohm Fully balanced Class D Amplifier

Reference:
TOP2562a
Condition:
New
€139.00 (tax incl.) €149.00
Colour
Available for immediate shipping.

Add to wishlist
Description

New Topping PA3s 2xMA12070 Fully balanced Class D Amplifier

Each channel of PA3s uses one MA12070 Class D power amplifier chip. This allows separation in layout improving performance and reducing crosstalk. The power is shared across two chips, the heat dissipation is also halved for each chip, improving reliability and extending the lifespan of the product.

High output power

PA3s could output 80W x2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1 %, output power will be 65W x2 at 4ohm load. The output power is enough to drive any bookshelf speakers and even some floor speakers. 

Balanced + Single-ended inputs 

PA3s provides TRS balanced input and RCA single-end-ed input. The use of balanced input eliminates potential ground loop problems giving the pristinely clean audio without any hum. Two inputs are selectable using front panel button. PA3s will remember the input selected when it was turned off.

"Comfort zone" with lowest distortion 

The lowest THD+N of PA3s is in the range of 10-20W output, which happens to be the power range commonly used for listening to music. Everything is just in the right condition.

D10 Balanced could be best USB DAC for PA3s 

D10 Balanced can provide high-fidelity USB decoding and TRS balanced output. When used with PA3, it is equivalent to adding a high-performance USB input to PA3s. This combination is simple and efficient.

With the help of a DAC, the function is expanded to a greater extent 

PA3s can be used with a DAC to expand the categories of digital inputs; if used with a DAC+HPA, more comprehensive functions can be achieved. 

Content list:

- PA3s

- AC to DC power adapter

- AC cable

- User Manual

- Warranty card

Read moreShow less
Product Details
TOP2562a

Specific References

EAN13
8057977090482
Designer
Reviews
No comments

Leave a review

  • Quality:
Describe this product using simple and short words.
Upload images:
Drop images here or click to upload.
Disqus
You may also like
€1,283.50 (tax incl.)

Lector Audio ZAX-70 - 2 × 70 Watt Solid-State Integrated Amplifier

The ZAX design project marks a new era for amplifiers, introducing new concepts aimed at creating an amplifier capable of driving any load under any input-signal condition. The ZAX design is based on a high-voltage (120 V DC), high-current (±20 A) circuit. To achieve this ambitious goal, our engineers required custom-made components:

• Special high-current, high-voltage transistors capable of handling low-amplitude signals.
• Special output devices featuring transistors capable of handling high currents and equipped with integrated temperature compensation.
• A special high-energy, low-flux-loss AC mains power transformer.

The result is the ZAX design! The ZAX delivers extraordinary sound quality: the FET stage provides a smooth and fluid soundstage, while the high-energy power transistors ensure excellent performance, with detailed high frequencies and authoritative, well-defined bass.

The electronic circuit is based exclusively on discrete components, transistors and FETs (input device), with no integrated circuits used in the signal path! (ICs cannot deliver high current!)

The amplifier features 5 high-level line inputs, an output for the loudspeaker system, and a tape-recording output.

The ZAX-70 replaces the ZAX-60 model. The new integrated amplifier offers increased power of 70 W per channel into 8 ohms and a chassis design that harmonizes with the other models in the range (CDP-603 CD player and Digitube). The ZAX-70 represents the evolution of the ZAX-60 for the “R” series of transistor electronics, characterized by a chassis with rounded sides. The shape is not merely an aesthetic evolution, but also ensures greater chassis rigidity, improved mechanical behavior of the cabinet, and better vibration control.

The ZAX-70 is designed with an exclusively transistor-based circuit, without the use of integrated circuits in the signal path. The bipolar transistors have been selected for their high current capability, reaching a peak current of 12 A! There is only one capacitor in the signal path; it is not electrolytic, but a high-quality film capacitor. There are no limitations on the current capability of the output stage, which can therefore drive loudspeakers with low load impedances.

The volume control is operated by an ALPS Blue Velvet series potentiometer; the control position is indicated by a blue LED, specially designed for its anti-static properties. A volume-controlled passive output allows connection of an active subwoofer or a headphone amplifier.

As with the chassis design, particular attention has been paid to eliminating and controlling every vibration generated by the power transformer.

An aluminum remote control is supplied for operating the amplifier's volume.

List of items included:
- Power cable
- Multifunction remote control
- User and maintenance manual
- Manufacturer's warranty

Technical Specifications:

POWER OUTPUT @ 8 OHM 70 W RMS per Channel
DAMPING @ 100 Hz > 100
Frequency Response – 1.5 dB @ max. power 10–50 kHz
Sensitivity for all line inputs 200 mV
Tape recorder output voltage 150 mV
Total Harmonic Distortion (THD) > 0.1%
Signal-to-noise ratio > 100 dB
Line input impedance 50 kΩ / 220 pF
Power supply and power consumption 110/220 VAC, 190 W, 50/60 Hz
Weight and dimensions 10 kg net – 430 × 300 × 108 mm (W × D × H)

€1,690.00 (tax incl.)

Second hand unit, In excellent condition, supplied without the original packaging. Fitted with Philips ECG small-signal tubes and a brand-new matched quad of JJ KT88 power tubes. Includes a 1-year warranty.

€990.00 (tax incl.)

The Rega Brio is an exceptional amplifier: musically complete, has a refined and powerful sound, and goes far beyond its class for balance and tunefulness

Settings

Menu

Create a free account to use wishlists.

Sign in