This update to the enormously successful FiiO X1 DAP makes many internal and external changes to enhance an already extremely good value player.
The all in one look of the original has been replaced with a sleek modern, two-tone style which offsets a black front-piece with an aluminium chassis in one of three colours (black, rose-gold and silver).
New! Now also available in Red Limited Edition finish.
- Supports the common 5 lossless formats (APE/FLAC/WAV/WMA/ALAC) up at 192kHz/32bit
- Supports microSD cards up to 256GB (or c.87 days worth of music, depending on file format)
- Dual mode Bluetooth receiver; can send and receive signals concurrently
- Brand new touch wheel technology - Interchangeable line-out/headphone-out port
- Supports in-line remote control (NOTE: not all makes of headphone supported)
- Adjustable volume through Line-out - Deep-sleep standby mode.
While echoing the wheel and button layout of previous FiiO players, the X1ii enhances the experience by replacing the mechanical scroll wheel with a solid touch responsive one similar to early iPods. By studying and comparing dozens of designs and through hundreds of experiments, we have finally developed the unique FiiO touch wheel with higher sensitivity, better anti-interference, enhanced reliability and long service life
Music listening is no more limited by wire. The X1ii also supports Bluetooth 4.0 connectivity, allowing you to both send your audio to external Bluetooth speakers and headphones. Infact, two-way transmission allows it to receive Bluetooth signal while sending Bluetooth signal. RM1 FiiO remote-control can be used at the same time when Bluetooth headphone or speaker is on.
It provides a perfect link between music and vehicle audio system, which has greatly improved the acoustic quality of vehicle audio system and let you enjoy the music on the way. (When vehicle engine is ignited, X1 is turned on too. When you shut down the engine, X1 stops immediately. There are no tedious manual operations anymore).
Dedicated professional high quality DAC chip
Inside, the X1ii boasts a brand new TI PCM5242 DAC chip to boost the SNR whilst supporting a full differential line output.
Strong lossless format support
It supports the five common major lossless music formats: APE / FLAC / WAV / WMA / ALAC at up to 192kHz/32bit.
Improved line output functions
It supports both headphone output and line output, which can be used as audio source to your amplifier to increase your pleasure in listening to music. Line output can be easily set in system settings.
New deep-sleep standby design
Deep-sleep standby enables instant-on playback. Standing by as long as 15 days allows music to be your companion at any moment.
In-line remote control function
Improved in-line remote control function can effectively adapt to most headphones available on the market, in addition to a new function of volume adjustment. Functions available: Fast forward/Next, Rewind/Previous, Vol+/Vol-, Pause/Play. (NOTE: not all makes of headphone supported, does not support volume control of Apple Earpods).
Music enjoyment for 30 thousand minutes
It supports micro SD card up to 256Gb. When calculated by 30Mb for a piece of lossless music, it can accomodate approximately 8.738 pieces of music. If a piece of song lasts for four minutes, you may listen for 34.952 minutes, i.e. 2.098 hours or 87 days.
The battery has also been refined to provide up to 12 hours of continuous playback.
Light and portable
All of this fits rather neatly in a profile that is 15% thinner, 4% less wide and 4% lighter in respect of the previous model. Humanized design: Arc waist design is employed yo provide better hand fitness and feel.
Full aluminium alloy and compact design provides a better hand feel. Dimensions: 97 x 55.5 x 12 (mm).
Choose a color you like
Available in three popular colors (Silver/Rose gold/Black).
All-new UI themed interface
Continue to use 2.0 inch color display with a resolution of 320*240, plus characteristic UE operating system (with six built-in color themes available at your choice)
|Model/Number||All new X1 / FX1221||Headphone out (PO)||3.5mm headphone output jack|
|Color Available||Sliver/Black/Rose gold||Headphone Impedance Range||16~100 Ω|
|Dimensions||97mm×55.5 mm×12 mm||Volume control type||100 steps digital potentiometer|
|Weight||102 g||Bass Boost||N/A|
|Display Screen||TFT 320×240||Treble||N/A|
|Analog Audio Output Jack(LO)||3.5 mm headphone output jack||Balance||5 dB|
|Digital Audio Output Jack||N/A||Gain Selection||N/A|
|USB DAC||N/A||Equalizer||7-band equalizer (±6dB)|
SoC: JZ4760B , DAC: PCM5242, LPF: OPA2322, OP: ISL28291
|Partial Performance Parameters for Line Output|
|THD+N||≤ 0.003% (1 kHz)||SNR||≥115 dB (A-weighted)|
|Frequency Response||5 Hz~60 kHz (-3dB)||Dynamic range||≥107 dB|
|Crosstalk||≥ 101 dB (10 KΩ/1 kHz)||Line output Level||1.7 Vrms (10 KΩ/1 kHz)|
|Partial Performance Parameters for Headphone Output|
|Output Power 1||≥ 90mW (16 Ω/THD+N＜1%)||Output Impedance||＜1Ω（32Ω loaded）|
|Output Power 2||≥ 70 mW (32 Ω/THD+N＜1%)||Crosstalk||≥72 dB (1 kHz)|
|Output Power 3||≥ 8 mW (300 Ω/THD+N＜1%)||THD+N||≤ 0.003% (1 kHz)|
|Frequency Response||5 Hz~60 kHz (-3dB)||MAX output voltage||＞4.0 Vp-p|
|SNR||≥113 dB (A-weighted)||MAX output current||＞130 mA（For reference）|
|Power and Battery|
|Power||Recommend DC5V 2A||Battery Capacity||1800 mAh|
|Charge Display||Red light indicates , green light turns on after fully charged||Battery Display||Yes|
|Battery Life||＞12 h||Charging Time||＜3 h (DC5V 2A)|
|Battery Life Test Conditions|
|Load||M3 open earbuds (27 Ω)|
|Test File||MP3 44.1kHz/16bit (Download link)|
|Audio Format Supported|
APE(Fast): 192 kHz/24 bit;
APE(Normal): 96 kHz/24 bit;
APE (High): 96 kHz/24 bit;
FLAC: 192 kHz/24 bit;
WAV: 192 kHz/32 bit;
Aiff：192 kHz/32 bit;
Aif:192 kHz/24 bit;
WMA Lossless: 48 kHz/24 bit (to be supported by future update);
Apple Lossless: 192 kHz/24 bit;