FiiO FH5 In-Ear Monitors + FiiO X3 Mark III Portable High-Res Lossless Music Player - Bundle

131,19 €


135,25 €

  1. This product or combination is out of stock.

198,77 €


204,92 €

Descrizione del pacchetto prodotti

Two champions of sonic quality in their respective segments  do produce an exceptional final result of a natural and quality sound. Sound has life, breath, energy, it's wide, deep and finely refined. Listen to the system and enjoy your best sound experience!

Descrizione dei singoli prodotti

The new Portable High Resolution Lossless Music Player FiiO X3 Mark III. Balanced to the end! 
  • Hi-Res Audio
  • Bluetooth 4.1
  • DSD Support
  • Infinity Sound (3.5mm + 2.5mm)
  • 10H Battery Life
  • DAC PCM5242 x 2
  • mSD 256Gb
  • Touch Wheel
  • Deep Sleep Mode
Wider Soundstage From Balanced Output

The Fiio X3 Mark lll High Resolution Digital Music Player contains both 3.5mm single-ended headphone output as well as a 2.5mm balanced outputs, allowing you to experience two kinds of high quality sound from two different outputs.

Great Sound Powered By Dual DACs

You deserve better sound. The Fiio X3 Mark lll makes sure you get it with its dual high-perfomance PCM5242 DACs.

Independent DAC, LPF, and amplifier for greater noise reduction

The Fiio X3 Mark lll utilizes a design in which the DAC, low-pass-filter (LPF), and headphone amplifier are all-separated-greatly reducing the potential that any outside inteference has a significant negative impact on the sound.

Say good-bye to complexity with just one press

The Fiio X3 Mark lll adds a new multiple-function button, with which is just in one press allow you to access playback controls and the equalizer as well as switch between playlist and themes.

Hi-Res Audio Certified

The Fiio X3 Mark lll has been certified by the Japan Audio Society to be " Hi-Res Audio" capable. Support wide variety of lossless audio formats at sampling rates and audio bit depths up to 192KHz/32 bit ensure that you don't have to worry about whether you can even listen to a certain track while on the go.

Connectivity & Storage

The Fiio X3 Mark lll’s Bluetooth 4.1 connectivity comes from the F1C81 chipset, which enables low-latency transmission to ensure that you will never miss a beat getting your high quality music and supports up to 256gb micro SD cards, allowing you to carry thousands of songs with you on the go.

Multifunction Line Out/ Coaxial output with support of D2P and DoP

The x3 mark lll's line out also doubles as a coaxial outputs. In consideration that some external audio decoders may not have support for DSD and only support PCM, the new x3 capable of outputting both D2P and DoP.

Asynchronous USB DAC supporting up to 192KHz/24 bit audio

The Fiio X3 Mark lll can also be use as a USB DAC capable of decoding up tp 192KHz/24bit. You can slot the Fiio X3 Mark lll into the k5 docking headphones amplifier for a fully-featured and powerful desktop amplifier system.

Key Features

  • All new build quality with Injection Molding Technology and Tempered Glass construction
  • Uses dual Texas Instrument PCM5242 DAC
  • Discrete DAC+LPF+Amp
  • Audiophile-grade architecture and components
  • Supports up to 256Gb Micro-SDXC cards
  • 3.5mm single-ended, 2.5mm balanced, and SPDIF outputs
  • Added Multifunction Button for Playback, EQ, Playlist settings, Theme switch, etc
  • Supporting CTIA standard inline remotes on earphones (Apple, Samsung etc.)
  • Supports WAV, APE, WMA, FLAC, ALAC, DSF, DFF, etc at 192kHz/32bits
  • Dual mode 2-way Bluetooth v4.1 based on CSR8811 chipset for wireless connectivity
  • All new UI (User Interface) design with Deep Sleep mode minimising battery drain
  • Touch scroll wheel with Asynchronous USB DAC capability

Technical Specifications

  • External Memory: Up to 2 x 256GB microSD cards
  • Battery: Up to 10 hours of playing time (2350mAh)
  • Frequency Response: 5 Hz~70 kHz(-3dB)
  • Output Impedance: <1.4Ω (32Ω loaded) (unbalanced), <1.2Ω (32Ω loaded) [Balanced] 
  • I/O Ports: Headphone Output / Balanced Output, Line Out / Coaxial Out / Digital Coaxial Out, USB DAC 
  • Connectivity: Wifi, Bluetooth, Micro USB 2.0 
  • Supported Formats Lossless: DSD / DXD / APE / Apple Lossless / AIFF / FLAC / WAV / WMA; Lossy: MP3 / AAC / WMA / OGG

Fiio FH5 - Quad Driver Hybrid In-Ear Monitors

Exotic-inspired Acoustics Design - For an Unbelieveably Real soundscape

Like today's most advanced exotic super cars, the chassis and body must be extremely solid to extract maximum performance. The FH5's patented TRISHELL structural design ensures that this is the case, with a 5-axis CNC machined aluminium-magnesium alloy real shell, body, and front covers fixed tightly together with multiple screws - greatly reducing excess resonance and distortion.

Exotic-inspired S.TURBO technology - For a burst of pure, raw lows

The FH5's low frequency sound tube adopts FiiO's patented S.TURBO acoustic structural design. With its specially designed turbine-inspired design that makes clever use the physics of sound waves, you get meaty, deep bass that is more than capable of letting you feel the music. S.TURBO also filters out unnecessary mid and high frequencies produced by the bass driver ensuring a more seamless transition between the lows and highs.

Exotic-inspired independent sound tubes - To ensure driver units are perfectly in harmony

Inspired by the twin turbos of today's exotic super cars, the FH5 allocates one sound tube each for the low, mid and high frequencies. These tubes have been designed to impeccably integrate with the 4 driver units, allowing for a wonderfully smooth transition between the three main regions of sound frequencies to maximise the driver's combined potential, bringing you a phenomenal symphony of music. 

Knowles Balanced Armature + Polymer nanocompsite ferromagnetic dynamic driver

The FH5 employs an hybrid driver design that combines the best of balanced armature and dynamic drivers for an absolutely addicting sound. Low frequencies are deftly handled by a 10mm polymer nano composite dynamic driver, providing bass extension and quality beyond what you think is normally possible. Mid frequencies are produced by the Knowles ED30262 balanced armature driver, while high and ultra-high frequencies are created by the Knowles dual driver TWFK-31082 (greatly improved over the 30017) - specifically tuned to squeeze every last bit of performance from them. These four drivers per ear are combine to provide thunderous lows, lush vocals, and sweet highs for a sound that you won't forget anytime soon. 

Learining from the past - Inspired by the streamliner era

When designing the FH5, we wanted a design that not only represented practicality but also would evoke an emotional response. We ended up taking insertion from the iconic designs of the exotic streamliner wehicles of the early 20th century that exactly represent this essence. The textured, sweeping lines across the body of the FH5 recall a time where humanity relentless pursued both beauty and functionality, just like the FH5 itself does. 

MMCX connectors give you more ways to play

The connectors on the FH5's cable make it easy as possible to connect to other devices, with its elbow plug; and to easily be changed, with the grippy MMCX connectors coloured blue and red to easily identify the left and right channels. 

A flexible sheath on the outside hides a robust core on the inside high-purity mono crystalline silver-plated copper wire

The high-purity mono crystalline silver-plated copper wire makes up the FH5's hybrid cable effective minimizes distortion and signal transmission loss for the best sound quality possible. These wires are braided together in environmentally-friendly, transparent TPU sheath that allows you to appreciate the craftsmanship involved in making the cable. 

*The FH5 comes with the 3.5mm single-ended cable LC-3.5B; other replacement cables can be purchased separately.

Precisely machined aluminium alloy shell for easier insertion into your ear

The shell of the FH5 is of aluminium alloy precisely machined with cmc technology, ensuring that it will continue to lister for years to come. The FH5's shell designed is also reminiscent of custom in-ears, which not only provides an extremely comfortable fit but also shines as a stylish accessory to wear. 

Secure fit around the ear means you can create your own slice of musical heaven anywhere

The crescent shape of the FH5 units are specifically designed to conform to the human ear and provide a snug, comfortable fit. The isolation this design provides allows you to focus on your music even if you are on a busy street or next to a raucous party.

Hi-Res Audio Certification

The FH5 has been certified by the Japan Audio Society to be "Hi-Res Audio" capable. This means that the FH5 is capable of a frequency response up to 40kHz, which can fully reproduce the audio and give you a natural and life-like listening experience that truly lets you listen to the music the way the artists wanted it to sound. 

No matter if you're a giant or just a normal person - Get the fit that's right for you

Not only can the cable be easily exchanged, the ear tips can be too. Included with the FH5 are three different sets of small, medium and large pairs of ear tips: one set for balanced sound, another set from enhanced bass response, and finally one for enhanced vocals. Also included are three pairs of foam ear tips in all medium. With the great variety of bundled ear tips, anybody can tailor that sound to what they want in absolute comfort. 

Fiio FH5 Specifications

Driver type1 dynamic and 3 BAs(knowles)
Frequency response15Hz ~ 40kHz
Sensitivity112 dB/mW
Impedance19 Ω
Plug3.5mm gold-plated L-shaped plug jack (CTIA standard)
Cord length1.2 m
Weight8 g (single earbud)
Wearing typeOver the Ear
Detachable cable design Yes (standard MMCX connector)
Max. input0