Kudos Audio Super 10 Loudspeakers pair

New product

3 553,28 €

This article it's not in stock but can be ordered and it will take a number of days indicated into the Blue tab below, to be shipped to you. Please verify the availability for immediate shipping of other eventual versions of the same product.


The long-awaited production version of the Cardea Super 10 reference-quality stand-mount loudspeaker is here.

The Super 10 has been developed using technology from the Kudos flagship loudspeaker and is released as a limited edition to commemorate Derek Gilligan’s 21st year of designing loudspeakers. Reference quality digital and analogue playback systems will be used to give show visitors a taste of this remarkable loudspeaker’s capabilities.

The Super 10 shares the same 12 litre cabinets with the C10, Kudos' established stand-mount reference. The drive units are some of the best in the world; produced for Kudos by SEAS in Norway – a company with almost 60 years of expertise in this field. The K2 tweeter is developed exclusively for Kudos from the famous Crescendo unit. The main drive unit, developed by Kudos and manufactured by SEAS features a copper shorting ring to minimise eddy currents, an aluminium phase plug to act as a heat-sink and a hand-treated paper cone. This drive unit has been specifically designed for this application and to integrate superbly with the K2 tweeter.

Designing the drive units to integrate seamlessly allows the use of a minimal, low-order crossover reducing phase errors, blurring and other unwanted artefacts. Each crossover component has been carefully tested and selected for its performance in the Super 10 including Mundorf inductors, resistors, and ‘Mcap® Supreme Silver/Gold/Oil’ capacitors. These parts are produced to extremely tight tolerances and then hand-matched for use in the Super 10. The Chord Company internal wiring is carefully chosen for its musicality and resistance to the effects of vibration.


Type: 2 way, Bass Reflex
Recommended Amplifier Power: 25W – 300W
Sensitivity: 87 dB / @ 1 W / 1 m
Nominal Impedance: 8 ohms
Frequency range: 40 Hz – 30 kHz “AIRR” (average in room response)
Tweeter: SEAS - Kudos Crescendo K2 29 mm fabric dome
Mid bass driver: SEAS - Kudos 180 mm with copper shorting ring and hand treated paper cone
Dimensions: 350 x 200 x 270 mm
Weight: 10 kg

Kudos Audio at a glance

prod_kudos_audio_intro_3.jpgA bit of History...

Following on from the S100 the lower cost S50 firmly established the company for first rate performance and high quality engineering. Indeed the S50 continues to win awards for its performance and is a highly respected product many years after it was introduced.

In 2006 the company took a change in direction when it was re-launched by Derek Gilligan, the renowned loudspeaker designer, by moving into the design and production of a range of high performance loudspeakers. Derek is a true audiophile who demands the very best.

Coming from a family of skilled cabinet makers, hi-fidelity enthusiasts and professional musicians, (as well as having worked as a music / sound engineer in the demanding world of professional audio) and after years of designing for other companies, Derek wanted to bring a range of loudspeakers to the market based around exemplary engineering without gimmick, or artifice.

This is outlined in more detail in the 'Our Philosophy' section, and is the underpinning ethos of everything the company produces. The loudspeakers have already gone on to win awards and establish themselves as some of the best sounding available, with each model setting a standard at its respective price point.

Kudos is not standing still, continuous development and the desire to improve is a given and new ideas and products are always being worked upon.

Our Philosophy

The Kudos range of loudspeakers are designed with the overriding principle of allowing our customers to enjoy their music as much as possible, with the best engineered product at a given price point. A simple statement to make, but one which involves a lot of hard work to achieve, especially as we are our own worst critics and never release a product until we are fully satisfied with it.

A great many of the hi-fi loudspeakers on the market today utilise mass-produced components and styling techniques to make them appear more impressive and to hit key price points. This has unfortunately become a common practise and can lead to quality and consistency issues, severely compromising the end product. Instead, we at Kudos use traditional well-proven engineering techniques, the highest quality components, and the time-honoured method of voicing our loudspeaker by ear to produce inspiring results.

Some may wonder why not use a more complex solution but we prefer to follow an old an well proven piece of advice put forward by a Franciscan Friar and logician, William of Occam - entia non sunt multiplicanda praeter necessitatem. This statement is often known as “Occam’s Razor” and translates as “entities must not be multiplied beyond necessity” – we take this to mean “keep it as simple as can be, but do it as well as you can”.

Drive units

At Kudos we work very closely with SEAS of Norway on the design of our drive units which means we can draw on their vast knowledge of drive unit behaviour. SEAS provide us with a bespoke service and unparalleled build quality allowing us to have customised drive units for any application, so we always have the right driver for the job.

All of our Cardea models use 18cm main drive units, but the units used in the compact stand mount models are very different to those used in the larger floorstanders, although they look very similar. These different drive units have been designed to work in different cabinet volumes so we are able to use a unit ideally suited to its job in each model. For economic reasons this is something which many loudspeaker designers are not able to do and they are forced to use identical drive units throughout a range, compromising the overall performance.

In case you are wondering, the C30 uses a whole other set of units as well, just to make sure it too has the best of the best!

The tweeters we use throughout all of our loudspeakers are of exceptionally high quality, the “Crescendo” unit used in the C10, C20 and C30 is almost certainly the finest treble unit available today. Its only downside is that it’s also one of the most expensive! Similarly the other tweeter units used in the C1, C2 and X range are very high performing units with excellent detail, dynamics and harmonic accuracy. All of the tweeter units provide excellent dispersion characteristics and a very even response.


Kudos strongly believes that one of the keys to a truly musical performance from loudspeakers is a minimalist, low order crossover. To allow us to implement this we work very hard to ensure superb integration between the drive units. Our mid bass drivers are designed to have a very smooth and predictable roll off characteristic and match the treble units so well that minimal electrical compensation is necessary.

Low order crossovers have the benefit of lower phase distortion and energy storage so they are better at preserving the harmonic structure with less time smear and “ringing” (the storage and release of energy within the components).

Our crossover components are of true audiophile quality from suppliers such as Volt and Clarity Caps and are made specifically for us to stringent tolerances. The capacitors in the C10, C20 and C30 are silver wired and all internal wiring is done with quality Chord Company cables.


There are many theories on cabinet design for loudspeakers and each has its own advantages and disadvantages, at Kudos we use a relatively simple design but ensure it is executed as ably as current technology allows. Our cabinets are made from a high density MDF with internal bracing, they are damped with a variety of specialised compounds to control resonance and ensure minimal cabinet colouration interferes with the reproduced music. Externally, high quality real wood veneers and lacquers are used to provide a furniture standard finish.

Single and Bi-Wire

The reasons why single wire operation can sound better are many and a book could probably be written about the subjective pros and cons for both single and bi-wiring. It has always been our intention that the bi-terminals on a Kudos loudspeaker are intended for bi-amping and the removal of any links between terminals on a single amp system could only ever be a good thing.

Within the context of certain manufacturers’ systems and the painstaking attention to detail they put into the earthing arrangements, the improvements can become much easier to understand and hear. With the single wire arrangement we are essentially continuing the star earth principle all the way down the chain to the drive units themselves. For this type of system it is not surprising therefore that this is the configuration which sounds the best.

The sonic advantages are mainly in the time domain and harmonic structure; this is where the key elements that string the separate parts of music together are held. The result is a more cohesive and believable rendition of a given musical performance.

Rather than just make bi-wire loudspeakers and supply them with a wire link, we ensure each of our Cardea loudspeakers can perform to its best by making them available in two versions: one with a single amp configuration crossover, which is our standard supply, as well as one with a bi-amp configuration crossover to special order. This way we can ensure the loudspeaker can operate in the most sympathetic way possible to suit the system in which it is being used.

Write a review

Kudos Audio Super 10 Loudspeakers pair

Write a review



Diffusori eccellenti di dimensioni contenute. Suono dettagliato, scena sonora amplissima ed una ricostruzione tridimensionale che non ti aspetti da un volume così piccolo. Spedizione rapidissima. Consigli sinceri ed onesti da parte del sig. Ventura. Molto, molto soddisfatto.

  • Was this comment useful to you?
  • (2) (0)

Kudos super10 in un set-up Naim

Hanno sostituito delle Kef LS 50 e delle ls3/5a. Ho guadagnato in estensione e rifinitura agli estremi senza perdere la coerenza ed il fascino delle 3/5a. Molto soddisfatto anche della comunicazione e della correttezza di titolare è collaboratori. Spedizione super veloce

  • Was this comment useful to you?
  • (0) (0)

Write your review!


30 other products in the same category:


Demo now active on PlayStereo Studio.  

Book the listening session

..detailing your system and the date/hour you wish to arrive.

  • A reserved demonstration room chosen for the maximim calm and comfort.
  • Our Designers, prepared for your life of listening and to make you happy: great classics and talented
  • Our research: the atmosphere of the Theatre and the Concert Halls, achieved via an appropriate balance.
    No special effect or colouring.
  • The Music. A particular and not “ordinary” music library.  
A reproduction system that is natural, betters the music expressivity for any sensible listener.
 The growth of any musical enthusiast is strictly connected to the
reproduction system used!
So, we look for special products and we set balanced systems, capable to express the emotion and
the atmosphere of live music. 

How to arrive. We are Pescarain Pescara / Italy, in Viale Bovio 483 - at the 2nd floor of the “Despar Superstore" Palace [corner with Piazza Duca degli Abruzzi, above the Despar Superstore and the "360 training club" Gym], entrance from the back. Auto parking Despar Superstore.


Products availability:

  • Cherry

    This product can be ordered and will be shipped within 8 days. Also see the Availability tab and eventual options of the same product.

  • Black

    This product can be ordered and will be shipped within 8 days. Also see the Availability tab and eventual options of the same product.

  • Walnut

    This product can be ordered and will be shipped within 8 days. Also see the Availability tab and eventual options of the same product.

  • Rosenut

    This product can be ordered and will be shipped within 8 days. Also see the Availability tab and eventual options of the same product.

  • Maple

    This product can be ordered and will be shipped within 8 days. Also see the Availability tab and eventual options of the same product.

  • Oak

    This product can be ordered and will be shipped within 8 days. Also see the Availability tab and eventual options of the same product.

  • White

    This product can be ordered and will be shipped within 8 days. Also see the Availability tab and eventual options of the same product.

  • Available for immediate shipping.

    Product is available.
  • This product can be ordered and will be shipped within a certain number of days.

    Product is available to be ordered and will be shipped within the specified days.
  • This product is out of stock. The product is not available to be ordered. It could be incoming and to be email informed when it will be available for ordering, please click on "Email me when available" or contact us.

If a product is available an insufficient quantity, the system will not let you finalize the order, so in this case please contact us to know the future date when more quantities will be available.
Product availability is real-time updated and correspond to our actual stock quantities (Green) or to estimated obtainability times (Blue); in the case of (Blue) products, although the specified times are a realistic and conservative estimate, have to be intended as indicative and not as a binding obligation.

If you place an order containing both readily available products (Green) together with products that will make available within the indicated number of days (Blue), will be shipped alltogether when all product types are into our wharehouse; if you’d like we immediately ship the in-stock articles, it’s better that you place a separate order, or contact us.

When your order is shipped, we send you an email containing all details to track it.

For any further information please contact the Customer Service, available from monday to friday (hours: 9-13 / 15-17).