FiiO i1 Apple Lightning DAC & Amplifier

New product

Limited special offer

24,51 €

40,90 €

Available for immediate shipping.

Brand: FiiO

 
Description

Keeping your favorite 3.5mm Headphones Around with iPod/iPhone/iPad
The FiiO i1 is an Apple MFi certified, digital-to-analog converter (DAC) and headphone amplifier designed for the Lightning connector. The digital audio signal enters through the Lightning connector end that can be connected to the Apple iPhone/iPod/iPad (and other Apple products), while the analog audio signals are pushed out through the 3.5mm output. The i1 also automatically detects if you are using a standard headphone or one with in-line controls.

Just because Apple has ditched the headphone jack doesn’t mean you have to ditch your favorite headphones.

You can buy FiiO i1 in its longer version, with the cable 80cm length, or in the short version, about 7cm.


Tone quality: High-Performance DAC Chip for Better Quality than iPhone's Stock DAC

Within the i1 is a high quality chip with both a DAC and a headphone amplifier. Not only does this chip support lossless audio formats, as well as achieve a high signal-to-noise ratio and low distortion, it also supports high-definition voice calls to give you crystal-clear conversations anytime, anywhere. (The i1 currently only supports up to lossless 48kHz audio due to the Lightning Audio Module (LAM) – this may change to up to 192kHz pending changes to the LAM.)

High-quality Microphone that Clearly Captures Your Voice

Built into the i1 is a high-sensitivity microphone that ensures your voice is clearly heard during calls and recordings – no more miserable conversations due to poor voice quality.

Wonderful experience just in your fingers. The built-in high sensitivity microphone can transfer your voice clearly whether it's a call, a recording, or a WeChat chat. 


Seamless Metal Body to Perfectly Pairs with your iPhone

In the quest for making this product as innovative as possible, we have made the i1 only 9.5mm thick. With its carefully sculpted, seamless, yet lightweight body and its matte black color, the i1 gives off a delicate yet sophisticated appearance. The i1 is built so that once you look at it or feel it, you know that it is the perfect complement to your iPhone.

Feel at Home with a Familiar Layout
Since the i1 shares the same button layout as the stock Apple headset, you can immediately start using it without any hassles. The i1 further improves on the Apple headset with larger buttons with more tactile feedback, allowing you to complete actions more easily and quickly.
Long press or short press the + and – buttons to increase/decrease the volume.
Short press the PLAY (center) button to pause/play the current song.
Long press the PLAY (center) button to call up Siri.
Double tap the PLAY (center) button to go to the previous song.
Triple tap the PLAY (center) button to go to the next song.

Ergonomic: Control All with Your Fingers
The three-button design of the i1 allows you to effortlessly pause, play, and switch tracks, as well as answer the phone, adjust the volume, and a number of other operations. Just gently press the buttons with your fingers and you will find that you have no need to even take out your Apple product, ensuring it stays pristine and undamaged.

Simply Plug-and-Play
The i1 automatically knows when it is plugged in and when it is pulled out of your Apple device for truly seamless operation. No need to worry about any interference noise when connecting and disconnecting to your Apple product or when switching tracks – just plug it in and enjoy your music!

A Dedicated Companion App at Your Service
FiiO has a team specifically dedicated to maintaining a dedicated iOS app for the i1, for fast and convenient firmware upgrades in the future.

Function - Low power consumption: Quick Wake Up but no Wasted Electricity
When your Apple iOS device goes into standby, the i1 will automatically fall into a lower power consumption mode. You can also set the i1 to go into standby mode and/or sleep mode after a certain period of time to reduce the power used by the i1, and save it for your Apple device. You can even wake up your Apple device through the i1 by pressing the play/pause button – and you can wake up the i1 from your Apple device too.

Compatible with a Wide Range of Music Apps and Formats
The i1 not only supports iTunes, it is also compatible with many other music apps, including (but not limited to): Spotify, Tidal, and Apple Music.A total of 9 music formats are supported, including AAC (from 8 to 320 kbps), protected AAC files from the iTunes store, Apple Lossless (ALAC), and AIFF. You can be sure that you can listen to your favorite songs, no matter which format they are in.

  • Support nondestructive 48 KHZ (the highest) audio, support voice calls
  • Low power consumption, strong anti-jamming capability
  • Stylish appearance, convenient to carry
  • The original MFi certification
  • All Metal Aluminum body
  • Dedicated APP, seamless docking with Apple mobile phone, updating software synchronously with the iOS system
  • With wire control and MIC function
  • Support the 3/4 level transformation function of headphones, namely be compatible with international standards and non-international standard headphones. 
  • Available 80cm and 7cm length 

Appearance

The body of ilis processed directly from an entire aluminum bar, made of dozens of craft and is about 9.5 mm in diameter. It is soft and easy to carry.

The whole of il is designed without screw, with the grinding of the black, showing a exquisite and attractive metallic texture.It is a natural complement to iPhone

Compatibility - APP Support

Il can support iTunes,streaming software and music APP, like Apple Music, KuGou music, Netease Cloud, QQ Music.It supportsabout nine tracks format, including (8-320 KbpS), Protected AAC (from iTunes Store, Apple Lossless and AIFF etc. 

Specifications

Name/Model

i1/Fi1123

Color

Black

Weight

About 11.5g

Dimension

Length : 45.5mmDiameter : 9.5mm

Input Interface

Standard MFi Lightning plug

Length

About 80 cm

Output Interface

3.5 mm stereophonic interface

CODEC Chip

NAU88L25

Decode Support

Lossless 48kH
Support 192kHz after LAM opening to all

Output Power

30mW16Ω Load)

THD

<0.003%1kHz

Load

20Hz-20kHz

Output Impedance

<1Ω(32Ωload)

Device Supporting

Details in Package

Color

Material Code

Bar Code

Black

5510069

6953175710103

Box Dimension

90x141x95mm

 
Designer

FiiO logo

About FiiO Electronics Technology Co., Ltd.

01 Brand Introduction - HiFi+Fashion

FiiO Electronics Technology Co., Ltd. was established in 2007.  It is a high-tech enterprise that combines research, development, production and sales, and its sales are mainly based on its own FiiO brand as opposed to OEM/ODM.  It focuses on digital audio, with current mainstay products being portable headphone amplifiers, DAC / amps and portable digital audio players.

FiiO: It is composed of Fi (Fidelity) from HiFi and iO (represents number 1 and 0) which indicates the sincerer feeling and more convenient life the digital tech has brought to us.

飞傲: The Chinese transliteration of FiiO, as well as representing youthful vigor and the active & innovative spirit of the company.

Audio products are meant to fulfill the spiritual pleasure of users.

  1. FiiO provides products and service related to music.
  2. We also hope to bring happiness to our users with the provided products and service, which is also the key value of FiiO.

Customer Service

  1. Good after-sales service, more reliable
  2. Great user experience, more pleasure
  3. Variety of activities, more involved

About products

  1. Affordable: FiiO products are well-known for its feature of high cost-performance. Lowering the entry level to make more customers can afford.
  2. Easy to use: FiiO pays great attention to the user experience. We are not only provide products with high quality, but also easy to use and with long lasting durability.
  3. More accessories bring more fun: Enable to play in a variety way and use under more possible environments.
  4. Updates available: Equipped with a variety of ports, it makes the music players can still connect to external amp/DAC for upgraded enjoyment.
  5. Endless transformability available: With replaceable amp module and expandable storage, the X7 can bring more playability.

02 Company Profile

Research & Development Team

  • Twenty years of R&D experience in audio products
  • Former core R&D team for audio products from OPPO
  • A team of 20 professional R&D engineers in software, hardware, industrial design, structure and electro-acoustic.

Research & Development Investment

FiiO keeps bringing in advanced equipments and high-tech talents so as to ensure the stable growth and long term competitive edge. Up till now, the team size has expanded three times than that of 2007 when we established.

Team Composition

The R&D team is made up of development dep, engineering dep and QC dep, with 60+engineers in total.

Authorized certifications

FC, CE, KC, CCC and ISO9001:2008 ensure the safety and quality of the products.

Production management

FiiO has strict requirements to production with almost “zero tolerance” even to small problems, which is strictly in compliance with the International Quality Management System ISO9001. 

QC Equipment 

  • a. AP audio analyzer (valued at 200,000RMB).
  • b. Life-span test platform against high & low temperature, swing and plug & unplug trial.
  • Aging test carriage towards mass production.
  • Aging test machine under high & low temperature.

Customer oriented

Driven by customers’ needs, we innovate constantly and response promptly to the market changes. We develop new products based on customers’ needs and compete for more market shares.

Company culture - Our Vision

Present the world a better “Made in China”.

Brand Spirit

  • Innovation

the earliest company that designed the minimum volume headphone amplifier. First dockable amp & DAC product. First amp specially designed for iPod/iPhone. First amp with adjustable power supply and power supplied by mobile phone battery. First multifunctional headphone amp & DAC for Android smarphone. First Hi-Res music player at a price lower than 1000RMB supporting 192K music. First Android-based Hi-res music player. 

  • Quality

Repair Rate < 1%. Sound Quality Control system. Original components imported from TI, Wolfson, Maxim. Company-wide quality control. +20 quality engineers and inspectors. Complete testing facilities. 

  • Service

CEO at the frontline of customer service. 100% response to enquiries. The most popular headphone amplifier brand on Head-Fi. First class website and contents in the audio industry. Interaction with and support to customers on Facebook and Microblog (twitter-like social website).

Brand Mission

FiiO designs, produces and sells high-quality products at favorable prices to those who love music and style.

Write a review

FiiO i1 Apple Lightning DAC & Amplifier

Write a review

 
Comments(2)
12/12/2018

Qualità alla portata di tutti

Buon prodotto, aumenta il volume basso dell' Iphone e ne migliora leggermente la qualità audio.
Consigliato. Play stereo è sempre il Top.

  • Was this comment useful to you?
  • (0) (0)
10/05/2018

Ottimo rapporto qualità/prezzo

Possiedo un iPhone che spesso uso per ascoltare la musica, tutta riversata sullo smartphone utilizzando il formato lossless ALAC (Apple Lossless Audio Codec); ho acquistato il Fiio i1 DAC per avere quel "pepe" in più, specialmente da alcuni brani che non mi soddisfacevano del tutto, e devo dire che l'acquisto è veramente azzeccato. Corposità e separazione dei suoni molto accentuata così come rilevo un buon incremento della pressione sonora (uso diversi tipi di auricolari, tutti comunque di categoria "Hi-Res"). Consiglio l'acquisto per la qualità ed anche con una spesa abbastanza contenuta.

  • Was this comment useful to you?
  • (0) (0)

Write your review!

 
Questions

30 other products in the same category:

Customers who bought this product also bought:

Menu