Acoustic Revive SIP-8F is a Set of 8 Short Plugs to use on inused RCA Input connectors, to eliminate noise and controlling vibration. Product updated adding the "fo.Q" vibration control material, see below. SIP-8 is constructed with the hyper baric, highly rigid material - the nonmagnetic gold plated Brass and 2017 Aluminium alloy (Duraluminium).
NOTE: it's available separately the 2-Set.
You install SIP-8Fs to the vacant connectors (Line Input connectors, Digital Input connector, REC IN connector, etc. to stop reductions in sound quality by reducing noise and vibration. SIP-8 is also applicable for digital OUTPUTS, but not for the other Output terminals - see IP-2 product for Output terminals.
Principle & Structure
Each equipments vacant digital input and analog input terminal are place where dust gets easily collected. Not only that becomes an origin of mixture for noise.
By letting these input terminal short-circuit, it prevents noise getting inside the equipment. Furthermore, letting the input terminals short-circuit, unstable element of electrical current on ground side gets removed and movement of machinery circuit becomes stable.
Result is, advantage for power supply impedance and sound quality improves greatly.
In addition, board for terminal part tends to be very thin. This receives the influence of vibration. By using high specific gravity and hard material for short pin, it reinforces terminals and protects from vibration.
Attention: Please don't connect it to output terminal, and REC out terminal. This will stop the sound.
Attention: It has an remarkable effect for digital output terminal on CD transporter, but just in case please ask your manufacturer of the CD transporter or dealer if SIP-8F/BSIP-8F work perfectly.
Superior material used for sound quality and vibration control effect
SIP-8F/BSIP-8F is made of nonmagnetic gold plated brass and 2017 Duralumin.
This has an effect on improving sound and reducing noise and vibration.
Complete non-magnetism body structure
Not only material, SIP-8F/BSIP-8F has adopted direct gilding on plating.
This made the SIP-8F/BSIP-8F completely non-magnetism body structure.
Rigid connection by highly precise process and vibration control effect improved by epoch-making vibration control material!
We newly added the vibration control material sheet on both SIP-8F and BSIP-2F to further improve vibration control effect.
It is a sound quality adjustment material developed by professor Masao Sumita at Tokyo Institute of Technology by getting a Pre-venture support from JST (Japan Science and Technology Agency).
It is an epoch-making material and carries an overwhelming vibration control characteristic. It transfers and eliminates vibration energy from electrical energy to heat energy.
Eight sheets for SIP-8F and two for BSIP-2F is attached in the each package. Stick on the back of SIP-8F and BSIP-2F and listen to the sound quality difference and adjust the number of uses.
If the vibration control characteristic has matches well, the sound will become smoother and low end frequency will become powerful and a feeling of throbbing pulse will improve. On the other hand if the characteristic does not match, the sound pressure and a feeling of throbbing pulse will decrease. So it that happens, please adjust the amount of sheet.
Optional "fo.Q" sheet for previous product version will be available separately.
Audio Excellence Award 2005 TOP Prize for accessories category
VISUAL GRAND-PRIX 2005 for Home Theater accessories
Acoustic Revive at a glance
Acoustic Revive: Once you listen to it, you know the difference. The accessory and cable that not only changes sounds. The true accessory and cable manufacturer that revives the sound to most natural and real sound.
Acoustic Revive is a Japan producer of audio hi-end accessories and cables designed and engineered to obtain the best results today available. Construction quality is superb so they are also used in the major recording company.
The Japanese school of hi-end accessories for the fine optimization of an audio system, is here. Acoustic Revive takes audio tweaking very seriously, introducing materials and techniques extremely advanced:
- Using aerospace materials like the Duraluminium or physiological materials like natural quartz.
- Doing deep cryogenic treatments that, modifying the molecule structure, better the signal transmission.
- Employ demagnetizing treatments, to cancel the influence of the magnetic fields.
- Dimension and design basing on the Gold Section.
- Introduce the so-called "virtual grounding" concept.
When an audio hi-end system is treated with Acoustic Revive accessories, it sounds more detailed, natural, smooth, and also more deep, powerful and dynamic. Every Acoustic Revive product is 100% "Made in Japan".
Click here to download the Acoustic Revive brochure in Adobe pdf format.
Acoustic Revive products will not be shipped outside of Italy due to national distribution agreements restrictions.