Pair of PopPulse T150 PRO set as Monoblock and, on request, with the by-pass of the volume control - to realize bi-amplification, active or passive. This pair of Monoblock is capable of 180W per channel on 4 Ohm. Class T Integrated Amplifiers.

--- The new "PRO" version includes all features of previous model MKII with an all new and bigger power supply section. Better damping for using larger transformer & 8x 4700uf Philips caps at psu.

PopPulse T150 PRO replaces the T150 MKII retaining its four principal innovations: other than a stereo amplifier, can be set as Monoblock also by the RCA connectors, giving an output of 180W per amplifier; can be set as power amplifier bypassing the preamplifier section; better the signal-noise ratio, minimizing the high frequency hiss; regarding the volume control ,it adopt a traditional pot (without remote).

With the audio fidelity of Class-AB and the power efficiency of Class-D, integrated preamp, digital display and remote control, the PopPulse T150 PRO delivers exceptional power, sound and features... at an unbeatable price!

Quality components are used throughout... Elna polar and BP caps, dual OPA LM-4562 op amps in preamp stage. The Tripath TA 2022 chip give the amp its heart, soul — and muscle.

How does the PopPulse T150 PRO sound? Same (Tripath), but pleasantly different (TA2022). It is a bit more laid-back. Everything is there. Soundstage is big. Placement of instruments and voices are well defined. Sound is robust and authoritative with plenty of power for transients. You'll find no thin or dry female vocals here. And the lower end has a richer and more tonally defined sound.

Bottom line? This is a T-amp with muscle and laid-back warmth. If you have less than efficient speakers — or just want more power — and have been looking for T-amp sound (and a heckuva good deal) you won't be disappointed!





- 1 RCA Inputs
- Bridged Output Amplifier
- Over-Current Protection
- Over-Thermal Protection

* Class T Digital Audio Integrated Amplifier
* Monoblock Bridgable with 150 W/Channel
* 2 RCA Input & 1 Balanced Input for BTL
* High Quality Components, including Elna non-polar BP caps
* Over-Current Protection
* Over-Thermal Protection
* Volume Control can be bypassed and unit can be used as power amp
v * 180 watts BTL output with RCA or Balance input
* Frequency Response: 15-80 KHz (-1db)
* S/N: 98dB
* THD: 0.05% (1 KHz)
* Audio Input Sensitivity: 200mV
* Output Power:
- 100W @ 4Ω, 1.0% THD+N
- 90W @ 4Ω, 0.1% THD+N
- 60W @ 8Ω, 0.1% THD+N
“Audiophile” Sound Quality Output Power:
- 0.015% THD+N @ 70W 4Ω
- 0.015% THD+N @ 45W 8Ω
- 0.10% IHF-IM @ 25W 4Ω
* Power Supply: AC 110V-230V (±10%) 50/60Hz
* Max Power Dissipation: 120W
* Weight: 4.5 kg